spanishfly
02-09-09, 11:18 AM
I have for sale a pair of Kent AST 1623 cams. I bought these to use on my TB'd highish spec XE. However I also bought another set of cams at the same time so don't need two sets. These can run on hydraulic lifters, and standard valve gear. They will need pockted pistons.
Cam specs are as follows:
Power band: 3750-8000
Valve lift: I 11.43 E 11.30
Duration: I 304 Deg E 290 Deg
These are the ultimate cams before going to Solid lifters (which I now have). These have been made from blanks rather than being reprofiled, so should mean no nasty noises etc.
These usually retail at around £400.
Link to cams (http://www.larkspeed.com/index.pl?p=392AST1623&a=i)
All I want is £250 posted for them. http://www.migweb.co.uk/forums/images/smilies/beer.gif
Cam specs are as follows:
Power band: 3750-8000
Valve lift: I 11.43 E 11.30
Duration: I 304 Deg E 290 Deg
These are the ultimate cams before going to Solid lifters (which I now have). These have been made from blanks rather than being reprofiled, so should mean no nasty noises etc.
These usually retail at around £400.
Link to cams (http://www.larkspeed.com/index.pl?p=392AST1623&a=i)
All I want is £250 posted for them. http://www.migweb.co.uk/forums/images/smilies/beer.gif