PDA

View Full Version : 1.6 8v C16SE E16SE parts - airbox, K&N filters, inlet, injection rail, dizzy


Iain
20-08-09, 06:39 PM
1.6 8v airbox & AFM. Drilled at bottom on side away from engine. Comes with tatty but usable Fram air filter. Sold
Distributor. Sold
Induction hose. Slight cracking at back but no holes. Sold

Injection rail for 1.6 8v. £10

http://www.iainel.co.uk/images/forums/ForSale4/InjectionRail.JPG

E16SE Inlet for (with EGR hole in but can be used on C16SE). Alternator bracket bolt sheared off but could be drilled and tapped. £10

http://www.iainel.co.uk/images/forums/ForSale4/Inlet1.JPG

http://www.iainel.co.uk/images/forums/ForSale4/Inlet2.JPG

K&N cone air filter and AFM with adapter plate. Cone a bit squished from sitting under slam panel but usable. Sold

K&N panel filter to suit airbox (like the one above, also C16SE and C14SE too I believe). In brand new condition and not covered many miles since buying. £20

http://www.iainel.co.uk/images/forums/ForSale4/KNPanel1.JPG

http://www.iainel.co.uk/images/forums/ForSale4/KNPanel2.JPG

Think I've got a coil, ECU and wiring loom somewhere too. See following page for pics - one is sold but I can't remember which!

Postage available on most items, based in Nottingham.
Iain
22-08-09, 01:11 PM
Up.
Iain
25-08-09, 05:23 PM
I have two different ECU and looms to suit 1.6 engines also, pics on request.
Nick
25-08-09, 05:55 PM
Any chance on a Bottom end or head!?
Iain
25-08-09, 05:56 PM
Afraid not, just some bits and bobs I've got left since selling the engine.
Iain
28-08-09, 05:15 PM
Could maybe swap for 20XE parts if anybody's interested.
mini_glen
30-08-09, 02:57 PM
thanks for replying to my wanted add mate, ill definatly have the air flow meter off you, either one, and could you post some pics of the ecu's you have showing pins and make. thankyou!

Glen
saloonwoody
30-08-09, 04:05 PM
K&N cone air filter and AFM with adapter plate. Cone a bit squished from sitting under slam panel but usable.

http://www.iainel.co.uk/images/forums/ForSale4/KNCone.JPG

how much for this and adapter plate posted m8 ? without afm :)
Iain
30-08-09, 06:58 PM
thanks for replying to my wanted add mate, ill definatly have the air flow meter off you, either one, and could you post some pics of the ecu's you have showing pins and make. thankyou!

Glen

I'll get you pictures of the ECUs tomorrow when it's light and not raining. :)
Iain
30-08-09, 07:00 PM
how much for this and adapter plate posted m8 ? without afm :)

PM'd.
saloonwoody
30-08-09, 07:08 PM
re re plied lol
mini_glen
08-09-09, 12:14 PM
any chance of ecu pics? cheers
Iain
09-09-09, 06:56 PM
Pics of looms and ECUs. Both looms have the multiplug cut off in favour of crimp terminals for fitting to a non GTE/GSi car.

Bosch ECU and loom, had this running on my old engine, with fuel relay. I think this has a missing plug or two (supposed to have a RON plug?) but ran fine without:

http://iainel.co.uk/images/forums/ForSale4/Loom1a.JPG

http://iainel.co.uk/images/forums/ForSale4/Loom1b.JPG

http://iainel.co.uk/images/forums/ForSale4/ECU1a.JPG

http://iainel.co.uk/images/forums/ForSale4/ECU1b.JPG

Siemens ECU and loom. Not had this one running, and was told it is off a 1.6 8v but please check if you're unsure. Sold

Postage shouldn't be too much on these.
Iain
15-09-09, 06:59 PM
Bump, stuff still for sale. Postage available on most things.
Stanley
15-09-09, 07:01 PM
Long shot here. . .

Im after all the bolts and threads to bolt the inlet onto an E16SE head.

Any chance?

Cheers, Stan.
Iain
15-09-09, 07:10 PM
Afraid not, Vauxhall might still do them though?
Stanley
15-09-09, 07:10 PM
My local cowboys will only do them in packs of 40 or something daft like that.

Hmmmm . . .

Cheers anyway bud:thumb:
Iain
28-09-09, 11:42 AM
Bump.
ady40
28-09-09, 11:24 PM
interested in the bosch ecu was that a tenner posted and do u take paypal
Iain
29-09-09, 09:15 AM
PM'd.
Iain
06-10-09, 06:48 PM
Parts still for sale. GTE airboxes don't come up for sale that often!
nomisc20xe
06-10-09, 10:43 PM
how much for the air box posted ? realy needed !! cheers simon
Iain
10-10-09, 06:24 PM
£30 posted for the airbox & AFM.
novalovingned
16-10-09, 05:41 PM
Will you do the induction hose for £8 posted mate?
Iain
25-10-09, 05:49 PM
Airbox and hose sold, anybody want the remaining bits?
Iain
03-12-09, 10:42 PM
Bump, few parts left. Offers.
tim_bisley77
05-12-09, 02:05 AM
Hey, hey, just registered! I've been waiting for this sort of stuff on Migweb for ages, lol, mate just told me bout this today... Is anything still available mate? I'm after the inlet manifold, the injection rail and what ecu's you got mate?? I need a c16/e16se ecu, well, gotta be MPI no matter what and preferably from a DIS type veeehickull...:d How much on the postage boyo?
Iain
05-12-09, 11:22 AM
Hello, welcome to the site. I still have the inlet manifold and injection rail off the first page. The ECU and loom that's left is a Bosch one which I was running on a distributor engine, so I believe it's an E16SE one.

Let me know what you want and I'll weigh it and give you a rough postage quote!
tim_bisley77
06-12-09, 08:33 PM
cwl, how much for injection rail, inlet manifold, ecu and loom then please mate?
Iain
06-12-09, 09:52 PM
PM'd.
ady40
06-12-09, 10:11 PM
PM'd.hi ian still after a ecu if u still got it available was it a tenner posted if so wats ur paypal addy cheers ady
Iain
06-12-09, 10:13 PM
I'll let you know if Tim doesn't have it.
tim_bisley77
07-12-09, 12:29 AM
Tell you what let boyo have the ecu and whatever, i'll have a look and a think and let you know later on onn the rest if thats alright... Don't keep things back for me if someone is definite on em, cheers...