PDA

View Full Version : long term project breaking, lots of parts and interesting shell



maccas
17-08-09, 11:05 AM
reluctant sale but everything has to go, the shell can be seen in the link below, the shell has had the following done:-

-o/s/r wheelarch repair panel welded in and fillered, needs finishing

-numerous patches welded throughout car

-shell fully stitch welded

-rear welded in strut brace between turrets

-underneath has had all old underseal removed, 2 layers of red oxide, 2 layers of stonechip and finished off with underbody sealant, underside is mint

-original gear shifter cut out and plate welded in with mk3 astra shifter fitted

-corsa master cylinder fitted in battery tray, needs bracing to finish

-brackets welded in for cobra clubman bucket seats or similar

-all surplus brackets removed

-beam and front arms fitted with polyrace bushes

-3 or 4 more patches to finish plus filler and paint

-shell is pretty straight but large areas of lacquer peel on the roof

-will come with a pair of decent doors, bonnet (dinted where badge used to be), bootlid with sr spoiler, all glass, door insides i.e electric window motors

-no steering rack or column

-not rolling, just bare shell with panels mentioned plus front and rear suspension arms

going to get pics soon £125 ono pick up only

http://www.pngclub.com/forum/viewfeaturecar.php?ref=3268

Parts:-

-Gsi front bumper diamond black ( has crack at bottom but has been repaired with fibreglass) needs paint but comes with towing eye cover pick up or organise your own courier sold to srs1

-Gsi rear bumper diamond black with silver stripe, one noticeable scratch, otherwise very good condition pick up or organise your own courier sold to srs1

-Gsi oem side skirts, good condition, still in original finish, not painted, sold to alanmc

-Koni damping adjustable front shocks with 60mm jamex front springs, complete units with top mounts, damping adjustable only provisionally sold to draper

-Custom made -90mm rear springs as new (nearer 80mm when fitted on lightweight car) sold to novalicous

-set of four astra mk3 6 spoke alloys with four good 195/50/15 tyres, two goodyears and two fuldas, all with 4mm+ tread, complete with caps, wheels could do with refurb, £60 ono

-one single cesaro wheel with good sava 195/45/15 tyre, wheel in good nick with centre cap, £20 ono

-full set of gsi/sr window frames front and rear good condition sold

-pair of brand new mirrors, no mirror covers, £6 each or £10 the pair

-ENGINE and bike carbs 1998 x16xe removed from s plate corsa sport 1.6, 38k on the clock, just had cambelt, doesnt have any management, comes with exhaust manifold and front pipe, not finished inlet manifold to go with kawasaki zzr1100 40mm carbs, main plate is made but needs runners finishing off, f15 gearbox + spare x16xe with 80 k on clock for spares, sold to g111mds, pick up only

i am based junction 38 of the m62 east yorkshire, may be able to deliver the larger items for petrol money within 30 miles or so, postage can be arranged on smaller items, pm me for contact number then i can send pics on phone if need be, any questions just ask, if i find any more bits i will add them as and when, maccas :)

draper
17-08-09, 11:14 AM
what else needs doing for the inlet on the carbs ??

ill definatly have the front suspension

maccas
17-08-09, 11:22 AM
il go get you a pic of the inlet now, all the pieces are there but they will need cutting up and re-welding etc.

ok front shocks provisionally sold to draper

maccas
17-08-09, 12:13 PM
pics of inlet manifold, engine and bike carbs:-

http://i189.photobucket.com/albums/z125/maccas125/DSC00115.jpg

http://i189.photobucket.com/albums/z125/maccas125/DSC00116.jpg

http://i189.photobucket.com/albums/z125/maccas125/DSC00117.jpg

http://i189.photobucket.com/albums/z125/maccas125/DSC00118.jpg

http://i189.photobucket.com/albums/z125/maccas125/DSC00119.jpg

http://i189.photobucket.com/albums/z125/maccas125/DSC00120.jpg

g111mds
17-08-09, 12:42 PM
-ENGINE and bike carbs 1998 x16xe removed from s plate corsa sport 1.6, 38k on the clock, just had cambelt, doesnt have any management, comes with exhaust manifold and front pipe, not finished inlet manifold to go with kawasaki zzr1100 40mm carbs, main plate is made but needs runners finishing off, f15 gearbox + spare x16xe with 80 k on clock for spares, £200 the lot, pick up only

I'll take all this for £200. Will contact you later re collection if you can PM me your number please. I'll call tonight.

Thanks, Jamie

maccas
17-08-09, 01:03 PM
pm'd

stevie-p
17-08-09, 01:06 PM
do you have a pic of the cesaro ?
and is postage possible and if so a price please?

maccas
17-08-09, 01:18 PM
pm'd

novalicous
17-08-09, 04:24 PM
would you do £50 collected on the rear springs this week end and could you pm me a postcode

cheers Craig :thumb:

offplot
17-08-09, 05:11 PM
You have PM

maccas
17-08-09, 05:24 PM
novalicous pm'd, rear springs provisionally sold

maccas
17-08-09, 05:27 PM
offplot pm replied

maccas
17-08-09, 08:53 PM
bump, gsi skirts added

novalicous
17-08-09, 10:38 PM
Collected rear springs top bloke :thumb:

maccas
18-08-09, 10:43 AM
cheers mate, bttt

L33 LEG
18-08-09, 12:23 PM
have you got any other diamond black panels for sale?

maccas
18-08-09, 12:40 PM
sorry mate all panels from the car are lagoon blue and the doors are rover amaranth purple, bttt

L33 LEG
18-08-09, 12:44 PM
ok mate, cheers anyway.

maccas
18-08-09, 07:06 PM
bump

maccas
19-08-09, 10:16 AM
bttt

Alanmc
19-08-09, 10:46 AM
How do you want paying and i'll take the sideskirts mate?

maccas
19-08-09, 03:44 PM
alanmc pm'd

Alanmc
19-08-09, 05:48 PM
Replied

maccas
21-08-09, 12:39 PM
bttt

g111mds
21-08-09, 11:13 PM
Dan, good to meet you today and thanks for helping to get the engines loaded into the van. 500 mile round trip but certainly worth it.

Cheers, Jamie

maccas
22-08-09, 11:34 AM
no problem, glad you got back safe, get a project thread started and i will keep an eye on it, good meeting you aswell, bttt

danzel
28-08-09, 10:25 PM
you still got that cesaro alloy wheel