PDA

View Full Version : Oil pressure switch


chimp007_uk
13-08-09, 07:42 PM
I've got digi dials mounted in the nova, and the pressure switch on the c20xe block only has 2 pins. One goes to the warning light, what goes to the other? and which do i connect the pressure gauge wire to?

Thanks kindly! :thumb:
brainsnova
13-08-09, 09:08 PM
on the digi dash display the oil pressure square is the warning light and the guage is the one that moves. blue/green is the warning light and the blue/yellow is the oil pressure guage on the digi wiring.
chimp007_uk
13-08-09, 09:11 PM
on the digi dash display the oil pressure square is the warning light and the guage is the one that moves.

I know that... I mint the wiring to the switch
brainsnova
13-08-09, 09:18 PM
do you want to know which wire goes to which pin?
chimp007_uk
13-08-09, 09:21 PM
do you want to know which wire goes to which pin?

Thats the kiddy. I have a 2 pin switch was wondering if it's correct and where the wiring goes
brainsnova
13-08-09, 09:30 PM
i would assume both wires go to the dash and the wire colours are the same.
peester
19-08-09, 09:07 AM
i was told the other day: the blue/ green should have the male round plug that pushes onto the plastic plug sticking out of the oil pump, on the block.
The other , blue/yellow, should have a spade-crimped like connection i think, and that should just slide on.
Tho im on a z18xe, my engine and wiring had the plstic plug on the blue/green, so that was easy, but the blue/yellow has no where for it to go, nor has any crimp-style connector on it..
peester
19-08-09, 09:10 AM
clicky:
http://www.pngclub.com/forum/showpost.php?p=1263154&postcount=12
chimp007_uk
19-08-09, 07:09 PM
cheers peester, I'll have to get some pics of my sender up i have one terminal which is a push on and one which is a ring connector and (m5) screw through it.
peester
19-08-09, 09:40 PM
^^ ah! yes please chimp show me show me
chimp007_uk
19-08-09, 10:22 PM
http://i40.photobucket.com/albums/e229/chimp007_uk/Photo0269.jpg

http://i40.photobucket.com/albums/e229/chimp007_uk/Photo0270.jpg
peester
20-08-09, 05:34 PM
hmm mine not like that,.. only has the push on connector..
no worries, i sort summat sometime.
chimp007_uk
23-08-09, 06:28 PM
anyone have anyideas?
peester
26-08-09, 11:18 AM
?
chimp the crimp ring connector is the one that'll do the oil pressure..
that terminal needs a wire routing through and connecting to the blue and green at the back on the digi dash clocks..
yes?