Breaking High-spec mega low mileage 1.6 16v track nova

[dhdev (Oli)]

Engine - Corsa GSI C16XE engine, SBD/Jenvey taper throttle bodies, MBE engine management, ITG Megaflow sausage air filter, Polished trumpets, Autosprint stg2 camshafts, Ported/polished/gasflowed/skimmed cylinder head with double valve springs, SBD vernier pulleys, SBD aluminium cambelt rollers, Re-bored/honed/skimmed block, Omega/SBD pistons, Lightened + balanced crank and rods, ARP bottom end bolts, Lightened + balanced Nova GSI flywheel, Adjustable fuel regulator, Bosch cream injectors, Magnecor Ignition leads, Mocal 10row oil cooler, SBD/BTB exhaust manifold, Powerflow 2.25” twin box exhaust comes with alternator/bracket and starter. 193bhp, 130lbft £3250

Box – Harry Hockly straight cut close ratio box, 3.9FD Quaife ATB diff. £1250 Deposit taken.

Shell – Extremely low mileage (15k miles iirc), Harry Hockly strengthening kit, seam welded bay, Safety devices 6-point cage with welded in spreader plates, welded in rear strut brace, spare wheel well removed and plated with aluminium, strategic lightening, comes with internal brake lines, modified to suit corsa bias pedal box (included), comes with rust free lightened doors. Polycarbs, wings, bonnet and boot NOT included. £1500 Deposit taken

Strengthened rose-jointed camber adjustable lower arms, tie bars, rose-jointed anti-dive tie bar mounts – £175 Prov sold

Seats – Magnum fibreglass buckets (V-light), comes with alloy side mounts £215 Sold

Sparco 4-point, aircraft buckle harnesses - £100 Sold

Sparco steering wheel with lifeline alloy quick release boss - £150

Hubcentric 25mm Eibach spacers (pair) - £50

15" Wheels painted anthracite with very good condition 195/50/15 R888’s - £300

Moltex car cover – £60

Red top battery - £75 Prov sold Novaneil

Genuine Pilbeam strut brace (As used on the works Nova rally cars), Polished mounts and satin black bar - £120

Any other parts ask!

Oli

Contact by -
PM
Tel. 07824374046
Email dhdev@hotmail.com

[Southie]

:eek: Gobsmacked your selling. One of my favourites.

Good luck with selling your goodies. :d

[calibra-keith]

i may of missed it but were you from ? any pictures of bonnet/boot and polycarb windows ?

[dhdev (Oli)]

Sorry my bad. I'm located in Leamington Spa near Coventry. I have a WIP in the Projects section that shows everything!

[Rick Draper]

I will take the pilbeam strut brace mounts if they are for sale?

[fearless]

Didn't know the Pilbeam brace fitted the Corsa Rick

But if Rick doesn't want it, I might be interested

[novaxe235]

i have a mate who may want the willwoods can you put my name on them and Il get back to you tomorrow.





*edited Il have the brakes + coilovers + bonnet* (deposit paid).

[dhdev (Oli)]

I'll put you as first dibs on the brakes and coilovers, only until tomorrow, then it's back on the market unless money is forthcoming ;)

[dhdev (Oli)]

Pilbeam strut brace added. See above.

[djbrowney]

Strengthened rose-jointed camber adjustable lower arms, tie bars, rose-jointed anti-dive tie bar mounts – £175

pictures of set up please buddy !

[Ernie]

Good luck with the sale mate.

[Mike]

Didn't know the Pilbeam brace fitted the Corsa Rick

But if Rick doesn't want it, I might be interested

Correct, mine didnt.

Best of luck with the sale btw cheif! Beasty spec car youve got.

[scott.parker]

Oli mate Ive text you, if the willwoods are for sale still i have cash waiting and can collect asap.

Scott

[xe Dan]

are windows fronts and backs or just fronts

[dhdev (Oli)]

Polycarbs are full set. Fronts with sliders, rears and tailgate window.

[gh227]

Is the engine now 1650cc and does it have steel rods?

[dhdev (Oli)]

It doesn't have steel rods, just standard rods balanced and fitted with ARP rod bolts. Rather embarassingly I don't know the CC, i'll dig out the invoice for the pistons tomorrow and let you know, apologies!

Edit - the pistons were fitted by Autosprint at the same time as having all the balancing work done, therefore he ordered the pistons in for me from SBD, i'll have to see if the invoice from Geoff states the piston diameter... I'll reply tomorrow evening as the folder of receipts is at my parents house.

[dhdev (Oli)]

Up to the top.

[djbrowney]

Strengthened rose-jointed camber adjustable lower arms, tie bars, rose-jointed anti-dive tie bar mounts – £175

pictures of set up please buddy !

???

[novaboyopr]

intrested in the seats, any more pics of them, what condition.
windows am also intressed in, possible post code please

[novaboyopr]

also intressted in the boot mate.

[dhdev (Oli)]

???

Sorry, I trawled through my pictures and didn't find any, then forgot to reply! I'll try and get some tonight. Its the TAS setup if that helps :confused:

[djbrowney]

Sorry, I trawled through my pictures and didn't find any, then forgot to reply! I'll try and get some tonight. Its the TAS setup if that helps :confused:

some pictures would be great mate, looked at your progress thread but couldnt see jack ****e lol

[dhdev (Oli)]

intrested in the seats, any more pics of them, what condition.
windows am also intressed in, possible post code please

http://i41.photobucket.com/albums/e296/dhdev/BluNov2078.jpg
http://i41.photobucket.com/albums/e296/dhdev/BluNov2083.jpg
http://i41.photobucket.com/albums/e296/dhdev/BluNov2092.jpg

Seat condition is average, they're not perfect but do the job :thumb:

Postcode CV32

[twin40s]

can the boot be posted?

[dhdev (Oli)]

can the boot be posted?


I'm not gonna take the chance I'm afraid.

[dhdev (Oli)]

Strengthened rose-jointed camber adjustable lower arms, tie bars, rose-jointed anti-dive tie bar mounts – £175

pictures of set up please buddy !

Awful quality pics cos I left my DSLR at my parents house, the pics make them look tatty but they're not! A lot of it is dirt and grease, I was wearing a fresh white t-shirt so wasn't gonna start cleaning :(

http://i41.photobucket.com/albums/e296/dhdev/03082009172.jpg
http://i41.photobucket.com/albums/e296/dhdev/03082009173.jpg
http://i41.photobucket.com/albums/e296/dhdev/03082009174.jpg
http://i41.photobucket.com/albums/e296/dhdev/03082009175.jpg
http://i41.photobucket.com/albums/e296/dhdev/03082009176.jpg

[novaboyopr]

sorry to be a pain but are the seats comfortable-ish?
any sort of deal on the seats, boot and windows?
can collect this weekend.

[dhdev (Oli)]

sorry to be a pain but are the seats comfortable-ish?
any sort of deal on the seats, boot and windows?
can collect this weekend.

There will be a cheque in the post tomorrow for the windows, barring any probs they are therefore sold I'm afraid.

[novaboyopr]

does the boot have the hinges or is it totally bonnet pins.

[dhdev (Oli)]

It's on 4 pins, alloy pins are lighter than the steel hinges ;)

[dhdev (Oli)]

does the boot have the hinges or is it totally bonnet pins.

Your PM is full, pins are included with the tailgate.

[novaboyopr]

opps my bad empty now could u pm me you number and full postcode, should be able to pick up at the weekend, and if the seats are still there have a sit in them to
cheers

[dhdev (Oli)]

Back to page 1, page three is for topless girls, not smallblock novas.

[dhdev (Oli)]

Up ya go. Come buy a piece of the greatest car ever *


















*IMO lol

[novaboyopr]

will be up sunday mate around 9 hopefully.

[k925franny]

Genuine Pilbeam strut brace (As used on the works Nova rally cars), Polished mounts and satin black bar - £120 pics plz soon as

[dhdev (Oli)]

Pics. I don't have a pic of the bar to hand, cos it never fitted past my throttle bodies very well, but the mounts were fitted to the car as so...

http://i41.photobucket.com/albums/e296/dhdev/BluNov2121.jpg
http://i41.photobucket.com/albums/e296/dhdev/DSC00032.jpg
http://i41.photobucket.com/albums/e296/dhdev/DSC00033.jpg

[stuartp]

sending tx, fingers crossed.

[dhdev (Oli)]

Up to the top :)

[dhdev (Oli)]

And again!

[dhdev (Oli)]

Bump for Gary

[Nick]

Seats still available !?

[Jay]

Would you split the tb's and management?

[dhdev (Oli)]

Nick- Seats are still available

Jay - PM me with an offer

[Nick]

Schweeet... I'l re-asses once pay-day occurs !

[dhdev (Oli)]

To the top. Make me an offer! ;)

[dhdev (Oli)]

Bump!

[dhdev (Oli)]

Bttt

[novaboyopr]

u still got the shell mate

[dhdev (Oli)]

Yes I still have the shell, interested? PM me if you like?

[dhdev (Oli)]

Up to the top

[Stephen.xe]

Hi, do you still have the gearbox and what is it F20? how old is the gearset and l.s.d what % of slip does it allow, Cheers.

[dhdev (Oli)]

It's an F13 Harry Hockley gearset and was fully rebuilt by Lee Hearsey prior to me purchasing it in approx August last year. The diff is a Quaife automatic torque biasing differential so it does not have adjustable plates and therefore does not wear out like plate type diffs, http://www.quaife.co.uk/What-is-a-Quaife-ATB-differential

[dhdev (Oli)]

Prices updated and sold items removed

[novaboyopr]

would u sell the manifold seprate mate, sorry for not getting back to you about the shell im keeping mine now.
cheers