wheel problems

[nova_sri_kid]

i was wondering what wheel spacers to use i was told not to use universal cos they cause wobble in the wheels, anyone know of specific wheel spacers for the nova and where to get them from

:thumb: :thumb: :thumb:

[fennah]

what wheels are u going to be using cos most are so tight on nova rear arches that you may have trouble on rears , and how wide a spacer do you want ?

[djshaggeh]

Try novarally, Colin. He had loads, he is in the traders forum.

[Benn]

Never had any probs with the universal ones.

[nova_sri_kid]

what wheels are u going to be using cos most are so tight on nova rear arches that you may have trouble on rears , and how wide a spacer do you want ?

speedline alesio's

[Benn]

Why are you spacing them? They fit fine.

[craig green]

speedline alesio's

If it is because they foul 16v or V6 brake calipers, shave off the lug on the caliper that holds the pad spring in. Did this myself, bought spacers but upon closer inspection, found you don't need them if you gently grind back the protrusion. :thumb:

[nova_sri_kid]

Why are you spacing them? They fit fine.

because the centre caps wont fit properly big metal ting in the way stickin through the middle of the wheel in the centre

[Benn]

You'll need to remove the dust cover, its not needed. Or hacksaw off the end of the cv (just a small bit.)

[folkyc20xe]

or maybe gently make a dent in the dust cover?? which are the problem? front or back??

[Benn]

Nsh the cover does stick out to far, just remove them.

[deanwilko]

fronts fit fine the rear that have the problem all i did on mine was remove the cap