View Full Version : tuning a c16se????
craighawkins
23-07-09, 08:06 PM
any advice from people who have played with this engine?
what parts to fit/not fit
not really wanting to spend £1000's just nice sensible stuff for a road car
thanks in advance
pikey1986
23-07-09, 08:17 PM
mild cam, port and polish, 4 branch and decent exhaust system, the list is endless mate
exact budget and care if its reliable?
craighawkins
23-07-09, 11:17 PM
ye has to be reliable.
was thinkin 270* cam
mild headwork
full re-build bolts+gaskets
will have to keep the catalytic so i'm unsure on exhaust as yet
dunno if i can get a ecu chip?
any further suggestions would be nice?
need a budget matey.
headwork
newman fast road cam
arp rod bolts
lightened/balanced bottom end
twin 40s or throttle bodies
decent ex manifold/system
budget will help massively. and whther you want mainly bolt on goodies or full engine strip. if want a head doing drop me a pm:thumb:
imho no need for 40's or ITB's.
Megasquirt and keep the existing inlet manifold but get a bigger TB for that. You can get the same power/torque as T40's with that method (and of course suitable mods)
megasquirt is so crude though imo!
imho no need for 40's or ITB's.
Megasquirt and keep the existing inlet manifold but get a bigger TB for that. You can get the same power/torque as T40's with that method (and of course suitable mods)
isn't there some sort of mod to use a frontera 2.4 TB????
and you siad ya just wanted a std rebuild
id go
port work, cut back valve stems , dowled matched maifold . cut back valves and 3 angle seats
good magnex type exhuast with a sports cat and a 4 branch manifold not 1 of those crude 4-1s eathier il tell ya how to make a good one for cheap hehe
and that chip is really give it a go see wht gains it gives
phil
20xe manifold with the flange cut off and the 1.6 flange welded on by any chance?lol
megasquirt is so crude though imo!
and 40's arent? lol I love carbs but I'm not delluded enough to believe they are perfect.
All ive done to mine is,
Kent cam
Ashley system
16v injectors
Boost valve
N i bought a inlet and a tb and completly cleaned it in work in an ultresonic cleaner.
20xe manifold with the flange cut off and the 1.6 flange welded on by any chance?lol
yep :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.