x16xe imobiliser key chip and transponder

[*Dave*]

hi bought an x16xe with key chip and transponder but how do i wire it into my nova ? also looks like i should have a plug for the transponder.

should i go to the breakers and get the plug and hard wire the plug into the car/loom?

please help.

cheers

[*Dave*]

anyone?

[gtachorley]

Hi

The Ecu, chip and transponder need to come from the same car firstly.

From the Ecu there is a 9 pin plug this shows what you need to do.

http://i531.photobucket.com/albums/dd359/Hond123/untitled.jpg

Your transponder should have plug in the bottom with 6 wires coming out these need to be connected up as the diagram shows, and you chip needs to be taped onto the transponder.

PS Sorry dont know whomade tht diagram that is so cant mention em.

[Southie]

The original diagram was made by Adam. ;)

[gtachorley]

Oh and when it says VSS you need to get one from a Nova (1.2spi I think) or use a digidash sensor if ya have a digi.

[gtachorley]

Hats off to Adam I sent ages using that diagram it was a godsend.

[AlexW]

And if u havnt got the plug, which seems likly then you need to get one off any vauxhall with that type of imobliser.

Oh and if you want help with it, pm me.

[Dod]

Sorry to drag up an old thread, but any plug WONT do. You need a Corsa one as different models have different coloured wires to the transponder.

[AlexW]

Yes but you can make it work lol I have a astra plug on mine, the Colours are wrong but as long as you know the pin locations it dont matter. And the pin locations are on here somwhere.

[Southie]

Try here but it may come to no avail ;)

CLICKY (http://www.pngclub.com/forum/showthread.php?p=1285332#post1285332)

[*Dave*]

thanks for the info!!!!!

2 last Q's, i assume the brown/white isnt needed on the transponder? as it isnt needed on the 9 pin plug.

and i only put the brown/yellow to earth when i want to flash codes?

[gtachorley]

thanks for the info!!!!!

2 last Q's, i assume the brown/white isnt needed on the transponder? as it isnt needed on the 9 pin plug.

and i only put the brown/yellow to earth when i want to flash codes?

Yeah thats right the brown/white isnt needed and when you need to flash codes the ecu warning light flashes codes when brown/yellow is earthed.

There is a guide here.

http://www.topbuzz.co.uk/info/fault_codes/fault_codes.htm (your engine is GM-Multec MPi (http://www.topbuzz.co.uk/info/fault_codes/fault_codes.htm#gm))