renault clio mk1

[vauxboi]

Alright people would anyone know what the offset bore pcd all that stuff is for the renault clio mk1. Cheers

[Mike]

PCD is 108 IIRC?

EDIT: Nope thats Ford lol

[Spudly]

Same as vaux 4 x 100 :thumb:

[floydy13]

they are 4x100 think off set is in the 30's

[vauxboi]

im sure the offset is between 32 and 38.

[vauxboi]

Anyone could you give me an offset.

[SRimon]

38 I think.

[pikey1986]

just googled it and it said 36 offset and centre bore is 60.1mm

[AlexW]

Yer the centre bore is different and depending on what wheels the offset is in the 30's whatever wheels.

[Rexy]

my word...

PCD is 4x100 et 35 usually. Bore size 60.1

Williams wheels/ and the phs1 turbines do fit but arch mods are needed :)

[vauxboi]

so if i got a set of alloys that were et 36 and pcd 4x100 and say lowered it 60mm would there be any need for arch mods would they just bolt on.

[pikey1986]

my wheels are a 37 offset and its been lowered by 40mm, ive had to grind the arch lip off and they still rub slightly

[Rexy]

Yes you would need some arch mods, I ran et25 on my car and ran it as low as as the dampers would allow and had to do some extensive arch mods :D

on somthing with a 35 offset you will need to at least take off the arch lip, Look into the oz f1 alloys from a clio sport 2000 - 2001 they are around an et40.

[vauxboi]

Ive just found out from K-Tec racing that mk1 clio's offset is 35mm.

[Rexy]

I said that ages ago pmsl.

[vauxboi]

so what alloys would you consider then bearing in mind of a 60mm drop all round.

[MK999]

I'd go for some that fit personally.

[vauxboi]

well yeah obviously but what wheels have that offset.

[MK999]

vauxhall wheels, anything with a larger offset that you can space out (rare)

[saloonwoody]

they goin on a hatch or a loon ?

[vauxboi]

its a renault clio so its a hatch, so what your saying is there are no alloys out there that get close to the 35mm offset.

[scott.parker]

So 3 pages and your telling us on a Nova forums that you want Williams wheels for a Clio??

[MK999]

So 3 pages and your telling us on a Nova forums that you want Williams wheels for a Clio??

lol lol lol

This isn't Performance Clio Group?!

[Pistol Pete]

Bellend. How about next time you a, give abit more information in you OP and b, get the right forum you numpty!

[Christ]

haha what a tool

[vauxboi]

what a tool, shut up mate im on here just asking what wheels would fit a clio ok because the majority of people on hear havnt just had vauxhalls there whole life so someone on here would know somthing about clio's because they might of had owned one before and as for asking on the wrong forum yeah thats wright but i prefer this forum to all the others i find this easier to navigate and ive spoken to people on hear before so i trust what they say and besides im not gonna join another forum just to ask what wheels fit a clio.

[AlexW]

LOL But nowhere did you say that you wanted to fit Clio Wheels to a Clio.... Nova forum, we thought you wanted to know if clio wheels would fit a Nova!

[vauxboi]

Alright i should of gone into more detail but who would wanna put clio wheels on a nova anyway i thought you guys would of clocked on.

[AlexW]

Lots of people have put clio wheels on a nova so!

[Pistol Pete]

Alright i should of gone into more detail but who would wanna put clio wheels on a nova anyway i thought you guys would of clocked on.

I had Clio/19 16v Ph2 alloys on my first SRi. And check out the GTE CD1 thread....hmmmm Clio turbines fitted.

http://i.ebayimg.com/24/!B(Vpwew!2k~$(KGrHgoH-DgEjlLl0b,6BKbydsEoCw~~_1.JPG

Give us abit more info next time. Mind readers we are not!