PDA

View Full Version : so i get my new nova...and what happens!



Wiggie
19-02-03, 10:09 PM
yeah so i bought the nova on sunday, luvly jubley J reg nova for me!
http://www.angelfire.com/ab7/jajaja/nova5.JPG
Then what do i do! back it into the stumpy wall!!!! i wont make any excuses...i shouldnt have been rushing! hmph!


http://www.angelfire.com/ab7/jajaja/nova46.JPG

oh yeah does any1 know how to get a rear bumper off? (merit) it's to dark and cold to go trying to figure it out.

many thanks for any replies.

rustboy
19-02-03, 11:24 PM
pull up the carpet in the boot, should be two bolts that need undoing.

Bill

Evolution
20-02-03, 12:06 AM
Yep, Mr Haynes manual tells you how.

I isnt a taxing job, just remember not to loose the rubber, or the bolts.

MattyWoo
20-02-03, 10:28 AM
Its a J reg so there should be a bolt at each side of the bumper in the wheel arch to undo as well as the 2 nuts in the boot. Undo all of them and it should just slide off mate.

Jim
20-02-03, 11:23 AM
Can't really tell what damage has been done from the second picture, but Do'h!

Whip the bumper off and see if you can knock the dent out of it (if that's what has happened).

Jim

Tilly
20-02-03, 01:10 PM
Men :roll:

Anton
20-02-03, 01:12 PM
if its dented as jim says you should be able to push it out, if its craked, take a trip to the scrappy :D

Wiggie
20-02-03, 08:55 PM
LOL its not as bad as it looked, its a scrage, it was the light that made it look like a dent, ahh well spoze this is a good excuse to get the good old sand paper out and smooth the whole thing....hmmm white bumpers sounds good?

(one good thing iv noticed with white, it blends spray paint well) however i thought id chase some rust about today. bare metal looks mint! if only it would stay like that!

here some pix for anyone who cares (shit quality as they maybe)

http://www.angelfire.com/ab7/jajaja/nova48.JPG
http://www.angelfire.com/ab7/jajaja/nova49.JPG

and no i havnt gone nuts and decided to go for the pink look...it's "Red oxide primer"

chers for info on the bumper!

who recons i do em white?

Wiggie
20-02-03, 09:02 PM
oh yeah....I NEED a haynes book, how much would i be look at for one?

Phil_G
20-02-03, 09:09 PM
?14.99 from halfords


phil

Chris LR
20-02-03, 09:09 PM
Do you need 'all' of it or just a few pages?

Wiggie
20-02-03, 09:12 PM
um, i think it probably best if i get the whole thing, iv got quite abit i wanna do to this puppy. chers

rustboy
20-02-03, 09:30 PM
if ure after a cheap haynes manual have a look on ebay m8, got mine for about 3 quid with postage :D