View Full Version : Another Nova
JaysNovaGte
08-07-09, 08:46 PM
Its been a while since my last nova, i wish i never got rid of my gte as it was mint but i could'nt afford to run it.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/novagte2.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/novagte.jpg
And know i bought this on ebay 2day and i went and had a look and i must say i was'nt to sure with the pics on ebay but up close when you look and the engine,arches and cills etc its mint there is no rust what so ever it is a very solid shell and am very happy with it, its only a 1ltr but it will do me untill i get more funds for a bigger power engine, it also comes with a 1.3 sport engine so i might put that in but not sure yet.
But plans are flame red paint job, gloss black bumpers and skirts, full stainless exhaust, stripped rear, bucker seats, show cage, rear brace, gaz or avo coilovers, fully poly bushed, gloss black speedline alloys.
Pics Of Nova.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=320393984608
Jay ;)
Rickardo
08-07-09, 08:48 PM
i had my eye on this as well, wasn't too sure about condition.. Good luck with the project. :thumb:
JaysNovaGte
08-07-09, 09:01 PM
i had my eye on this as well, wasn't too sure about condition.. Good luck with the project. :thumb:
Thanks
Thats red ones only a 1.0? Looks like a decent rep! Its even got a GTE radiator!!
Good luck with the project.
Edit - thought the red one was the 1.0 there lol, stoopid
JaysNovaGte
10-07-09, 05:42 PM
Thats red ones only a 1.0? Looks like a decent rep! Its even got a GTE radiator!!
Good luck with the project.
Edit - thought the red one was the 1.0 there lol, stoopid
Lol, cheers m8
JaysNovaGte
11-07-09, 09:54 PM
Got my nova 2day and my plates for rear disk conversion (thanks projctnova), here's some pics.
Plates for rear disk conversion
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion051.jpg
Pics of my nova
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion049.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion048.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion050.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion055.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion054.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion053.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/VanConversion052.jpg
Jay
let_nova
11-07-09, 09:56 PM
whats the deal with the pipe under the rad?
JaysNovaGte
11-07-09, 11:05 PM
whats the deal with the pipe under the rad?
Dont have a clue m8
General Baxter
11-07-09, 11:08 PM
its a 1.2 rad on a 1L,
the 1lL has diff ports
JaysNovaGte
11-07-09, 11:10 PM
its a 1.2 rad on a 1L,
the 1lL has diff ports
Am not to bothered, it will be coming out for a bigger engine.
JaysNovaGte
18-07-09, 05:24 PM
Update.
Started to take 1ltr engine out 2day just need to get engine crane and undo mounts etc.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject001.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject002.jpg
Ready to lift out.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject003.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject005.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject004.jpg
Am selling the 1ltr engine, its mint and has only done 38,000 miles and comes with shafts,gearbox, exhaust system with stainless back box (it flames also lol) http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/th_DSCF1873.jpg (http://s398.photobucket.com/albums/pp61/JAYSCORSACBOOM/?action=view¤t=DSCF1873.flv)
2Ltr 8v complete with box,ecu,shafts,downpipe etc
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject006.jpg
And my new alloys that are going to be refurbed and powdercoated gloss black with low profiles tyres.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject007.jpg
Jay
Novaboi_1991
18-07-09, 05:45 PM
haha what makes it flame dude?
JaysNovaGte
18-07-09, 06:11 PM
haha what makes it flame dude?
Nothing really theres no flamer kit, i just let it warm right up then pull choke up then rev it so it pops a flame and soon as theres a slight flame it just stands there flaming on its own lol
Liking the flames that's awesome!
JaysNovaGte
19-07-09, 11:10 AM
Liking the flames that's awesome!
Lol cheers boss
JaysNovaGte
19-07-09, 11:58 PM
Update,
Engine out.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject008.jpg
Started to take all the pipes off and remove loom etc.
Before
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject009.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject010.jpg
After.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject013.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject012.jpg
Got some paint stripper 2day to remove all the paint for seam welding and a good wire brush.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject011.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject014.jpg
Jay
where you get a bulk head mat?
JaysNovaGte
20-07-09, 12:08 AM
where you get a bulk head mat?
It came with car m8
JaysNovaGte
20-07-09, 09:05 PM
Removed some more stuff in the engine bay 2nite, brake servo, steering rack etc and applied loads of nitro mors to get rid of the paint still got a little more to do but its getting there.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject017.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject016.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject018.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject019.jpg
Should have it ready for saturday to do a bit of welding then i need to order a chassis plating kit and strut top plates.
looking good buddy keep the updates coming.
rick
JaysNovaGte
21-07-09, 03:52 PM
looking good buddy keep the updates coming.
rick
Will do m8 cheers
JaysNovaGte
24-07-09, 04:33 PM
Started cleaning my steering rack up and some other little bits and bobs.
Steering rack bracket
Before
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject023.jpg
After all polished up
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject024.jpg
Steering rack all painted up with new joints ect.
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject025.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject026.jpg
And tried on the brackets
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject028-1.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaProject029.jpg
I have my own business in fabrication work and i do alot of strut brace's etc and polishing if there is any thing anyone wants just drop me a pm.
Jay
JaysNovaGte
09-08-09, 09:33 PM
Update,
Stripped the c20seh engine down to a bare block and gave it a good clean down and a coat of black heat proof paint etc
I now need,
T3 turbo
T3 stainless manifold
Colins dump valve
Intercooler
C20let pistons and rods
Kent cam and adjustable vernier pully
Arp bolts
New gaskets
Oil cooler
Polished inlet
Magnetic sump plug
Engine
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaTurboEngineRebuild001.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaTurboEngineRebuild002.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaTurboEngineRebuild003.jpg
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaTurboEngineRebuild004.jpg
Painted up
http://i398.photobucket.com/albums/pp61/JAYSCORSACBOOM/NovaTurboEngineRebuild005.jpg
Jay
belly257
09-08-09, 10:13 PM
looks good mate:thumb:
JaysNovaGte
09-08-09, 11:23 PM
looks good mate:thumb:
Cheers m8
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.