how do you guys fit f13 to xe

[love em]

hi dudes im struggling fitting my f13 box to my xe engine . i did have a f16 in the car but decided i wanted to save money and hav more bottom end the fly wheel off the f13 is on im now stuck on the slave shaft with it being bigger than the f16 where it sits inside the crank , any ideas

[yayoboy]

i did it by modifying my f13/gte flywheel to match up with the crank of the xe, bear in mind it needs to be done by a **** hot machinist as it needs to be very precise, or, you could just buy mine, its lightened and balanced and ready to go on......

edit: also the centre hole of the flywheel needs to have a ring pressed into it to match it to the xe flywheel. if not the flywheel would want to move about under load, bad news if it does...

[love em]

how much m8 , how did you get round the slave shaft beind thicker than the whole in the crank that it sits in

[saloonwoody]

use an f15 box :)

[love em]

why wots the difference , do they put em in novas as standard

[AlexW]

No but there stronger, still same design, as per fitted to corsas and the like.

[nova_saloon]

you will prbs still blow it to pieces if you floor it to much, You will find it just spins up way to much