View Full Version : 2e carb help, mixture screws
jimbob-mcgrew
07-07-09, 12:39 PM
ive got nothing in my nova haynes manual about the 2e carb.
where abouts on a 2e carb are the mixture screws ?
primarily the richness one im after. (is it standard anti-clock richer, clockwise leaner ?)
dougie_boi
07-07-09, 12:41 PM
on left hand side of the carb mate the side facing the alternator but you will need a long ish thin plain screwdriver to turn mixture screw as its a narrow hole its in mate. p,s im sure its anticlockwise for richer
Asa-James
07-07-09, 01:34 PM
if its never been touched chances are there will be a plastic bung to stop people messing with the settings...
get a small pick or pointy thing to get rid of that. and are you sure theres notthing on the 2e? i'm sure i got all my instructions out of that for my old 2e3, and i'd presume its a similar body.
The 2E3 is coverd, in the front, same as the 1.3 iirc. if not its in the back bit, 1.4 style.
jimbob-mcgrew
08-07-09, 12:02 AM
nice one dougie boi :thumb:
yeh im confused, it says in the front that all models are covered including sr and gte, but ive been thru most of the book in the last year or 2 and it only covers 1.0/1.2/1.3 litre, i must have a shoddy copy.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.