ste porter
05-07-09, 05:52 PM
i have a full set of 4 c20let rods these have a stronger thicker casting around the little end good condithion i brought them with the intention of fitting them in my let when i rebuilt it but i came across some steel rods for a price i couldnt resisit instead
great condition ideal upgrade if your rebuilding your xe £40
i have a set of used but great condition arp 2000 rod bolts for steel rods£35
Alloy sump gauard good used condition this is a propper one not a home made job its about 15mm thick alloy and fairly heavy you may need to make some brackets to fit as you require i never fitted it because it fouled the 3 inch down pipe on my let i payed £80 for it but i want it out the way so £50 will take it
2.0l 8v block been bored to just under 2.1 been decked ect comes with new matched pistons and rings never been built back up sinse it was done £40
mk2 gsi bumper iron with brackets £10
standard let injectors £20
standard let intercooler good condition £20
also have turbo of a c20let this is my turbo that i ran at pvs it was rebuilt about a thousand miles ago but has started to smoke so i have removed it earlyer than i intended to fit a to4e which was the plan from the start im after offers around £200 but am oppen to offers i know this sounds alot for a smoking turbo but im going to put it on ebay in a week and they seem to take that on there very easily but so make me an offer before i ebay it. its had all lips removed new impeller wheel bearing seals ect vxr actuator modified and fitted ect
lots of random interior and engine parts for xe/lets just ask if your missing stuff as i have spare xe heads clips cranks ecu,s looms alsorts justy ask
great condition ideal upgrade if your rebuilding your xe £40
i have a set of used but great condition arp 2000 rod bolts for steel rods£35
Alloy sump gauard good used condition this is a propper one not a home made job its about 15mm thick alloy and fairly heavy you may need to make some brackets to fit as you require i never fitted it because it fouled the 3 inch down pipe on my let i payed £80 for it but i want it out the way so £50 will take it
2.0l 8v block been bored to just under 2.1 been decked ect comes with new matched pistons and rings never been built back up sinse it was done £40
mk2 gsi bumper iron with brackets £10
standard let injectors £20
standard let intercooler good condition £20
also have turbo of a c20let this is my turbo that i ran at pvs it was rebuilt about a thousand miles ago but has started to smoke so i have removed it earlyer than i intended to fit a to4e which was the plan from the start im after offers around £200 but am oppen to offers i know this sounds alot for a smoking turbo but im going to put it on ebay in a week and they seem to take that on there very easily but so make me an offer before i ebay it. its had all lips removed new impeller wheel bearing seals ect vxr actuator modified and fitted ect
lots of random interior and engine parts for xe/lets just ask if your missing stuff as i have spare xe heads clips cranks ecu,s looms alsorts justy ask