View Full Version : failage!!!
lobbed some paint on my b piller and it dried like this.
http://i12.photobucket.com/albums/a226/sclurgess/new%20loon/S7303084.jpg
what would you do to sort it ??
joff-turbo-nova
04-07-09, 07:13 AM
I would try two things -
1. rub it back a bit - new primer and then top coat again
if 1 fails to sort the problem -
2. rub paint back to bear metal then primer and colour
Cheers
Joff
let_nova
04-07-09, 07:44 AM
cheapo paint?
I would try two things -
1. rub it back a bit - new primer and then top coat again
if 1 fails to sort the problem -
2. rub paint back to bear metal then primer and colour
Cheers
Joffindeed thats what i thought i would have to do which is why i lost me head lol. after i had calmed down tho i went back out to it and rubbed it with my hand, it dissapeared abit so a quick rub with a cloth got it to this
http://i12.photobucket.com/albums/a226/sclurgess/new%20loon/S7303087.jpg
then a quick light wet scotch got a completely uniform finish so quite wtf is going on i dunno lol
is it hot where you are? probably the aerosol thinners drying too quickly.
You also get a milky effect if the paints applied in too manmy layers too quicky when the prev layers thinners cant evaporate fast ehough and gets trapped under the next layer of paint.
Thats why youre supposed to leave time between coats.
is it hot where you are? probably the aerosol thinners drying too quickly.
You also get a milky effect if the paints applied in too manmy layers too quicky when the prev layers thinners cant evaporate fast ehough and gets trapped under the next layer of paint.
Thats why youre supposed to leave time between coats.oooo thats quite interesting. ill try leaving longer, thank you ade
Does look like odd drying from heat/thinner build up.
Few mins between coats and a bit more even spraying if you can.
djbrowney
05-07-09, 09:06 PM
looks like it came out ok in the end but do you have a draft in the garage could cause uneven drying :cool:
Looks like silocone contaiminated........
well ade i tried what you surgested and read the can. it said to leave 15 mins between coats so i left double to be sure and it still does it. doesnt bother me as such just means more work :(
What did you clean it with first?
Where you painting over paint?
Are you putting it on evenly?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.