PDA

View Full Version : Clearout, doors, XE parts etc



Lee H
24-06-09, 10:24 AM
Nova

Blue drivers door, front corner bent slightly but no rust £30
http://i192.photobucket.com/albums/z163/Lee_H25/076.jpg
http://i192.photobucket.com/albums/z163/Lee_H25/078.jpg
http://i192.photobucket.com/albums/z163/Lee_H25/079-1.jpg

60mm rear lowering springs £25
http://i192.photobucket.com/albums/z163/Lee_H25/067-1.jpg

Red mk2 grille with standard slats £20
http://i192.photobucket.com/albums/z163/Lee_H25/064-1.jpg

14" Gsi wheel with brand new tyre £15
http://i192.photobucket.com/albums/z163/Lee_H25/058.jpg
http://i192.photobucket.com/albums/z163/Lee_H25/059.jpg

Heated seat switches, brand new £10
Mk2 front foglight switch, modified surround plus a bit of loom £10
http://i192.photobucket.com/albums/z163/Lee_H25/072.jpg

Momo gearknob £15
Mk2 top dash section complete (heater vents, dials cover, headlight switch surround) £20

Engine

Pot flywheel £10
XE dizzy ECU with superchip £40
XE dizzy ECU £20
2 sets of XE pistons and rods £40 a set
4 x XE beige injectors £15
4 x XE blue injectors £25
XE fuel rail with 2.5 bar reg £10
XE/LET rocker cover £15
LET KKK16 bare turbo manifold £20
LET downpipe elbow £10
2 x XE inlet cams £25 each
XE exhaust cam, dizzy type £15
Machined bottom pulley for XE conversion, front got slightly damaged getting bolts out with grinder but works fine £10

Open to sensible offers on all parts.

Cheers

Lee H
21-07-09, 12:16 PM
Up

napalm_27
21-07-09, 12:23 PM
pic of bottom pully?

ant_tay
21-07-09, 02:15 PM
If only you was closer i would have had the door would it be possible for you to package it up for a courier if it ainr too expensive

projctnova
21-07-09, 02:30 PM
pm'd mate

Lee H
21-07-09, 02:31 PM
If only you was closer i would have had the door would it be possible for you to package it up for a courier if it ainr too expensive

Far too much hassle packaging it up. Sorry.

let_nova
21-07-09, 04:08 PM
20 posted on the bare turbo manifold?

BIGS
21-07-09, 04:10 PM
Modified gear linkage to suit Nova F28 conversion

got any pics at all?

Lee H
21-07-09, 04:35 PM
20 posted on the bare turbo manifold?

Cost me £10 to post the last one so no thanks.

Lee H
21-07-09, 04:36 PM
Modified gear linkage to suit Nova F28 conversion

got any pics at all?

Will get some up this week.

Welshy
21-07-09, 04:36 PM
pics of doors mate please

gunny
22-07-09, 12:01 AM
would you sell just 2 XE pistons mate?

Lee H
22-07-09, 07:00 AM
Got pics of the door, just waiting on new camera lead so I can upload them as I've lost it.

Would sell two pistons, with rods or without?

gunny
22-07-09, 10:34 AM
No rods mate, how much posted? Cheers

Lee H
22-07-09, 10:51 AM
Ah, will have to have a look at removing the rods as never done it before.

£25 posted sound fair as it leaves me with an incomplete set and the rods aren't much use to me?

gunny
22-07-09, 12:07 PM
Sounds fair to me mate, i take it they're standard size and of useable condition?

Lee H
22-07-09, 12:10 PM
They are standard size and don't have any marks on them, i've never seen XE pistons out of a standard engine with detonation marks on to be honest.

They are certainly a 100% improvement on yours lol

gunny
22-07-09, 12:13 PM
Lol i think some ashtrays would be an improvement on mine tbh! Yeh sounds good mate it'll have to wait till friday though when i get paid, unless i can dip into someone elses bank in the meantime (i'll let you know)

Lee H
22-07-09, 12:15 PM
No worries, will put the rods in as well as can't be bothered removing them. Might be worth you just swapping the whole lot anyway as the impact may have weakened/bent the rods in some way.

gunny
22-07-09, 12:20 PM
Yeh spose, saves effort stripping and swapping them over too. Thanks matey.

Steve
22-07-09, 01:32 PM
nova 60mm rear springs - what make are they? £25 posted?

Lee H
22-07-09, 03:32 PM
No idea on make, were on the car when I bought it and the powdercoat has come off them now.

There are pics of how it sat at the start of this thread http://www.pngclub.com/forum/showthread.php?t=91331

Would need £30 delivered as they are a bit heavy and need to buy a box to throw them in?

Lee H
22-07-09, 10:15 PM
Some pics now added on page 1

John
22-07-09, 10:18 PM
pm sent Lee.

gunny
23-07-09, 12:06 AM
Hi mate sorry to be a pain but one of my mates gave me a full set of good xe pistons earlier today! Cheers anyway bud.

Lee H
24-07-09, 11:12 AM
Linkage sold. Rest going on good old ebay tonight!!