points setting

[Burt_100]

Does anyone know what the point setting for a 1.0 push rod engine is???

[burgessovsalford]

Basically the points are a little metal thing in the dissy(not in the dissy cap, in the dissy itself).

Its hard to explain in writing how to adjust it, but it shows u in the Haynes manual how to do it & also what setting its to be adjusted to.

[Manta Mad]

According to Haynes, the point setting is 0.4mm but if posssible check with a dwell meter as this is far more accurate - dwell setting is 47? to 53?