View Full Version : points setting
Burt_100
11-02-03, 03:56 AM
Does anyone know what the point setting for a 1.0 push rod engine is???
burgessovsalford
11-02-03, 11:17 AM
Basically the points are a little metal thing in the dissy(not in the dissy cap, in the dissy itself).
Its hard to explain in writing how to adjust it, but it shows u in the Haynes manual how to do it & also what setting its to be adjusted to.
Manta Mad
13-02-03, 11:17 PM
According to Haynes, the point setting is 0.4mm but if posssible check with a dwell meter as this is far more accurate - dwell setting is 47? to 53?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.