push button start

[Ballsy]

i have just acuired very cheaply a push button start kit from richbrook, can any body tell me how i wire it up?? eg what wires i have to join etc

thanx

Ballsy

[mikeoxford]

without looking at car i cant remember from memory, just dig out the last wire in the "third click" of the starter as it were, and you connect it to the central one i THINK.

take the keyswitch off the back of the steering column and turn it you will soon find / see which two wires are in the final click.

then its a case of wiring the button in to the central one and the third one, to put some power out to crank the engine.

ill have a look 2moro as i need to fit my second imboilisier under there........

[novarally9999]

Either put a switch on red and the two black wires or leave on ignition.

Run a wire from the thick black to push switch and take off the wire (its black with a red line) and run this to the other side on push switch.