View Full Version : push button start
i have just acuired very cheaply a push button start kit from richbrook, can any body tell me how i wire it up?? eg what wires i have to join etc
thanx
Ballsy
mikeoxford
09-02-03, 08:23 PM
without looking at car i cant remember from memory, just dig out the last wire in the "third click" of the starter as it were, and you connect it to the central one i THINK.
take the keyswitch off the back of the steering column and turn it you will soon find / see which two wires are in the final click.
then its a case of wiring the button in to the central one and the third one, to put some power out to crank the engine.
ill have a look 2moro as i need to fit my second imboilisier under there........
novarally9999
10-02-03, 05:32 PM
Either put a switch on red and the two black wires or leave on ignition.
Run a wire from the thick black to push switch and take off the wire (its black with a red line) and run this to the other side on push switch.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.