What manifold do I have?

[paul james]

I want to buy a nice new 4-1 exhaust manifold for my 1.3Sr, but I'm not entirely sure what I currently have on the car. I have a reciept from the previous owner for a magnex GTE system upto the downpipe which I want to keep on the car, so are the manifold and downpipe I have GTE items too?, heres some pics of them off the car:

http://homepage.ntlworld.com/paul.james21/exh1.jpg


http://homepage.ntlworld.com/paul.james21/exh2.jpg

as far as I'm aware there are two types of manifold/downpipes, one for 1.3&1.4's and another type for 1.6 engines, with the difference been at the downpipe connection with the manifold meeting the engine end being the same on both.

So can anyone tell from the pics above if its a 1.3 or 1.6 type?

[jimbob-mcgrew]

looks like what i have on my 16sv, front section anyway, i believe there the same as 1.3 and 1.4 sr setups

[jimbob-mcgrew]

infact, could u do me a massive favour and look see if u can spot any part codes on those bits of pipe, im after conformation that theyll fit upto a 1.4 carb exhaust :thumb:

[paul james]

Theres no part numbers on the downpipe, and the codes on the manifold are too far rusted to fully read now.

[novalicous]

that looks very sumilar to the gte system i have if thats any help

[Mazz]

These are a standard E16SE manifold, looks very similar imo

http://img7.imageshack.us/img7/3554/image042ijy.th.jpg (http://img7.imageshack.us/my.php?image=image042ijy.jpg)
http://img7.imageshack.us/img7/5963/image043ydr.th.jpg (http://img7.imageshack.us/my.php?image=image043ydr.jpg)
http://img269.imageshack.us/img269/1593/image044jig.th.jpg (http://img269.imageshack.us/my.php?image=image044jig.jpg)

[AlexW]

IIRC the flange that goes onto the exhaust is a female end on 1.6's and male connection on SRs and the like.

[Asa-James]

if its any help the manifold on my old 1.3 was shorter, making the downpipe longer, i bought a setup like that with the larger manifold off ebay, advertised as a GTE system iirc