View Full Version : GTE rear splitter...
Asa-James
09-06-09, 10:36 PM
hiow the hell do they fit on? or do they only go on a certain type of rear bumper?
its a standard merit rear bumper i'm trying to fit it to
Asa-James
10-06-09, 05:09 PM
anyone?
assuming its a later style mk1 bumper you should see where the slits should be at the bottom of the bumper, if not you may need to make the slits and then fix it to the inside of the bumper.
Asa-James
10-06-09, 05:50 PM
so it is a case of making it fit. thankyou!
Yes, you should be able to see where the cutout is but if its a non gte bumper then you will need to make the holes, and find a way of securing it to the bumper afterwards, simple really.
Asa-James
10-06-09, 05:57 PM
Yes, you should be able to see where the cutout is but if its a non gte bumper then you will need to make the holes, and find a way of securing it to the bumper afterwards, simple really.
translation-cable ties, rtv silicone, woodscrews:thumb:
Yep, the holes that need cutting are slighty marked out iirc.
I done it on a old bumper, didnt take much.
translation-cable ties, rtv silicone, woodscrews:thumb:
:thumb: lol Whatever, it won't be seen anywho.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.