PDA

View Full Version : No indicators or hazards?



Mazz
05-06-09, 02:20 PM
As above, the indicators or hazard don't seem to work. The clock works which is off the same fuse so it can't be that, and i've tried the relay out my cav and that didn't work..
Any idea's?

Southie
05-06-09, 02:28 PM
Mk1 or MK2? If a MK2 it's probably your hazard switch is knackered.

AlexW
05-06-09, 02:34 PM
Cav relay is different i think?

check the hazzard if its mk1 or mk2.

Im presuming the tell-tale dont show eather? And no clicking?

Mazz
05-06-09, 03:55 PM
Sorry guys, its a mk1

I tried a different switch - no good :(
AW06 - your right, no tell-tail or clicking - like its completely dead..

AlexW
05-06-09, 06:23 PM
HMMMM Weird! You tried another hazzard switch ya say? how about trying another stalk, best that i can help.

Adam
05-06-09, 06:26 PM
Do you have the earth wire bolted to the passenger chassis leg in the engine bay?

dan16v
05-06-09, 07:51 PM
As above was the problem with myne, is the blower motor only working at 1/2 speed aswell?

Mazz
05-06-09, 08:21 PM
Adam - yes its on, as the heater blower and wipers weren't working, now they are!

Not tried another stalk, but i don't think it will help as the hazard should still flash, but the indicators flah when locking/unlocking the car...

mowgli
05-06-09, 09:43 PM
its the flasher unit then.

Mazz
06-06-09, 12:56 PM
I did try the Cav's - its had the same 3 pins but didn't help...trip to the scappy then...