plastic windows

[burgo]

is 3mm to thin???

[Steve]

I would think thats about right.

[burgo]

well standard glass is 4.5mm ish and ive got 6mm ply in at the mo which is ubber ubber tight.

only reason i ask is im tight and 3 mm is a fiver cheaper than 4mm lol

[NathanSRi]

only reason i ask is im tight and 3 mm is a fiver cheaper than 4mm lol
Meh lol

[novarally]

4mm is the minimum allowed for club level MSA-sanctioned motorsport events.

But places like 'Plastics 4 Performance' do offer a 3mm option if you aren't going to race/rally.

So 3mm should be OK.

[burgo]

its for the back windows of the hearse so no i wont be racing lol. thanks very much colin

[dhdev (Oli)]

Wouldn't you be better off with 4mm, due to the size of the windows! 3mm might get a bit floppy!

[R1CH]

I made mine from 3mm, there were abit wobbly, i'd use 3mm on the rears again but would go for 4mm on the fronts.

[General Lee]

Where are you soucing your windows from burgo. Need a rear for the saloon.

[Plug]

he will be making them :thumb:

[trackdaynova]

I replaced my 3mm to 2mm for weight saving :D lol

[General Lee]

he will be making them :thumb:

yeah i know that bit, but where is he sourcing sheet of plastic, polycarb from :thumb:

[trackdaynova]

any polycarb sheeting company should sort you out.

£50 sheet supplied me with enough to do 3 sets of windows for a Nova :D

[burgo]

Where are you soucing your windows from burgo. Need a rear for the saloon.found a place on ebay that do abit big enough for a tenner

[General Lee]

Cool ok i'll have a mooch around see what i can find. I take it's for the estate, what sills you using?

[stevei]

don't worry about using 3mm. i have that in mine with 4mm fronts. it will be fine

ste