View Full Version : plastic windows
I would think thats about right.
well standard glass is 4.5mm ish and ive got 6mm ply in at the mo which is ubber ubber tight.
only reason i ask is im tight and 3 mm is a fiver cheaper than 4mm lol
NathanSRi
28-05-09, 01:53 AM
only reason i ask is im tight and 3 mm is a fiver cheaper than 4mm lol
Meh lol
novarally
28-05-09, 09:28 AM
4mm is the minimum allowed for club level MSA-sanctioned motorsport events.
But places like 'Plastics 4 Performance' do offer a 3mm option if you aren't going to race/rally.
So 3mm should be OK.
its for the back windows of the hearse so no i wont be racing lol. thanks very much colin
dhdev (Oli)
28-05-09, 04:01 PM
Wouldn't you be better off with 4mm, due to the size of the windows! 3mm might get a bit floppy!
I made mine from 3mm, there were abit wobbly, i'd use 3mm on the rears again but would go for 4mm on the fronts.
General Lee
28-05-09, 07:30 PM
Where are you soucing your windows from burgo. Need a rear for the saloon.
he will be making them :thumb:
trackdaynova
28-05-09, 07:43 PM
I replaced my 3mm to 2mm for weight saving :D lol
General Lee
28-05-09, 07:49 PM
he will be making them :thumb:
yeah i know that bit, but where is he sourcing sheet of plastic, polycarb from :thumb:
trackdaynova
28-05-09, 07:50 PM
any polycarb sheeting company should sort you out.
£50 sheet supplied me with enough to do 3 sets of windows for a Nova :D
Where are you soucing your windows from burgo. Need a rear for the saloon.found a place on ebay that do abit big enough for a tenner
General Lee
29-05-09, 12:46 PM
Cool ok i'll have a mooch around see what i can find. I take it's for the estate, what sills you using?
don't worry about using 3mm. i have that in mine with 4mm fronts. it will be fine
ste
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.