Wazza024
27-05-09, 12:49 PM
Hi
I have for sale my Kent Cam kit and vernier for sale it will come complete with 2 cylinder heads. 1 head is ported and polished which was the 1 i was using on my car and the other head is just a standard 1 thats been skimmed and shot blasted. I had this cam running on my SRI for a while but no longer want it. The cam has only done about 2-3000 miles since i put it in. I still have the cam kit box and vernier box that will come with the cam to. I don't want to split it i just want it all gone as 1. The cam is a NVO 61K. There is only 1 cam carrier. This is for a 1.4.
http://i177.photobucket.com/albums/w212/gary23_2007/S7300147.jpg
I will get some more pictures of the other head later to. Im looking for £150 cam and 2 heads.
Also i have an Ashley complete exhaust system for sale comes complete with a 4 - 1 manifold with no o2 sensor port. Would be better suited to and SR. The system is rusty but no holes in it but has scratches on the de-cat pipe where my car is to low. The de-cat pipe is also slightly to short and blows where it joins in to the middle box but you can just put a repair pipe in there.
http://i177.photobucket.com/albums/w212/gary23_2007/S7300146.jpg
Looking for £70 for the exhaust
I have the picture of the other head that will be coming with the cam aswell
http://i177.photobucket.com/albums/w212/gary23_2007/S7300148.jpg
Also i have for sale a set of GTE side skirts that could do with a paint. 1 of them has a crack in it which i have shown in the picture. They come with no clips. Im looking for £25 ono
http://i177.photobucket.com/albums/w212/gary23_2007/S7300149.jpg
http://i177.photobucket.com/albums/w212/gary23_2007/S7300150.jpg
I also have a set of mudflaps which are original GM ones, which say on the card in the pack are meant to fit a corsa GSI and a Cav but weather or not they will fit anything else i don't know. There is 2 x 10mm bolts missing thats all. But looking for £25 for them
http://i177.photobucket.com/albums/w212/gary23_2007/S7300151.jpg
Collection only on these bits. Im located in Bucks
I have for sale my Kent Cam kit and vernier for sale it will come complete with 2 cylinder heads. 1 head is ported and polished which was the 1 i was using on my car and the other head is just a standard 1 thats been skimmed and shot blasted. I had this cam running on my SRI for a while but no longer want it. The cam has only done about 2-3000 miles since i put it in. I still have the cam kit box and vernier box that will come with the cam to. I don't want to split it i just want it all gone as 1. The cam is a NVO 61K. There is only 1 cam carrier. This is for a 1.4.
http://i177.photobucket.com/albums/w212/gary23_2007/S7300147.jpg
I will get some more pictures of the other head later to. Im looking for £150 cam and 2 heads.
Also i have an Ashley complete exhaust system for sale comes complete with a 4 - 1 manifold with no o2 sensor port. Would be better suited to and SR. The system is rusty but no holes in it but has scratches on the de-cat pipe where my car is to low. The de-cat pipe is also slightly to short and blows where it joins in to the middle box but you can just put a repair pipe in there.
http://i177.photobucket.com/albums/w212/gary23_2007/S7300146.jpg
Looking for £70 for the exhaust
I have the picture of the other head that will be coming with the cam aswell
http://i177.photobucket.com/albums/w212/gary23_2007/S7300148.jpg
Also i have for sale a set of GTE side skirts that could do with a paint. 1 of them has a crack in it which i have shown in the picture. They come with no clips. Im looking for £25 ono
http://i177.photobucket.com/albums/w212/gary23_2007/S7300149.jpg
http://i177.photobucket.com/albums/w212/gary23_2007/S7300150.jpg
I also have a set of mudflaps which are original GM ones, which say on the card in the pack are meant to fit a corsa GSI and a Cav but weather or not they will fit anything else i don't know. There is 2 x 10mm bolts missing thats all. But looking for £25 for them
http://i177.photobucket.com/albums/w212/gary23_2007/S7300151.jpg
Collection only on these bits. Im located in Bucks