Needing some help please

[Gavinski]

I'm missing the rubber ring that fits in the bottom section below, is this something I can buy or should I be posting for a gearlinkage in the wanted section?

http://i83.photobucket.com/albums/j301/swav9/IMG00279-20090521-1126.jpg

I'm also needing to try and find some sort of wiring diagram to help me wire the loom up to this, i'm sure it's the crank sensor?

http://i83.photobucket.com/albums/j301/swav9/IMG00277-20090521-1121.jpg

Many thanks in advance!

:thumb:

[gaznovalet]

so is it the actual grommet thing wich has the circlip in wich goes in the round circle part of your linkage? wot wud then allow it to be pushed onto the other part of gears. . as i have one sumwhere i cud post it to you if you wanted to try it? if so pm me your adress.
and is your engine early coilpack, or late dispack set up? and the picture of that sensor upside down?

[Gavinski]

Hi mate, the boy thats fitting the engine just said there's a rubber ring that fits in the very bottom ring that he needs, either that or a replacement unit.

Is this the same section that would be replaced by the quick shift gear linkage?? Thinking I'd maybe just replace this as it's a track car anyways.

My engines the dispack model and the photo of the sensor is not upside down.

Cheers

[corsa-xe1]

the sensor is a camshaft sensor from a late coilpack engine if that helps!

[sunnyjim]

would of thought that sensor would have a plug from the engine wiring loom going to it.