wtf is my nova UBER poverty spec!!?

[Curtoise]

right got a clock for my car the other day, not speedo's and actual time clock lol, anyway went to fit it and theres not wires in the loom for it????? anyway looking down i also dont have a cig lighter, which i want for sat nav and other various gadgets, i dont think iv got a wire in the loom either to add one???

[AlanH]

mine has neither of those either. just wire cig lighter in from the exhisting wiring. all you need is a + and an earth. as for clock the same i'd imagine and a live from your headlight switch for clock backlight

[Benn]

Wtf means "what the funk"

I'm sure the wiring is there, it might just be taped up in the loom.
Take the vent plastic trim off.

[Curtoise]

yeh i had a proper look lol, couldnt even find any bits taped up, apart from 1 wire but had a weird connecter on it

[AlexW]

Check everywhere, mine didnt have a clock or a ciggy lighter but the wiring was tucked down the side of the heater matrix with the radio wiriing IIRC.

[Curtoise]

oh this could be true, il look when i can be arsed LOL

[Damo]

The wires will be there bud mine was the same. my wires where taped up in the loom behind the heaters because running heat seats off my cig lighter wiring.:thumb: .

[jimbob-mcgrew]

mk.1 curt ? did you have a blanking plate where the clock wasnt ? im after one if u fancy selling it

[Curtoise]

rofl nah make a mk2

[jimbob-mcgrew]

ah k, no worries :thumb:

[Jack]

Clock illumination will be grey/green, can't remember the clock wire colours off the top of my head (I was thinking black & brown, but black is switched live...). Clock power connector is a chunky plug, so if its there you should see it.

If you can't find anything, you can always pull an illumination wire off the feed that lights up the rotary controls. As for the clock and cig lighter power, its probably easier to run a new cable into the car rather than tap into something else there.

[Curtoise]

ok il have a look this weekend, thanks for your help

[Nova_Sean]

Do you have the blanking plate mate?

My clock doesn't keep the time and its annoying!!

[Curtoise]

i have the blanking plate 4 the mk2 yes

[mowgli]

mk.1 curt ? did you have a blanking plate where the clock wasnt ? im after one if u fancy selling it

i have a grey one somewhere if its any use