Mk1 dash bits-Ashtray,fusebox cover,heater duct, rear fog switch

[Adam]

As above.
I need the plastic vent duct that goes between the heater matrix housing and the centre vents on a mk1 dash. Fusebox cover, and Ashtray panel thing (see pics down the page)

Some grey rear door cards

And a oil cooler sandwich plate, but it MUST be off a Astra gte 16v/early xe engine, with the flare type fittings and not the banjo fittings....

[novarally]

I've got the rear cards and I might have the oil cooler plate you need as well.

Please e-mail;

colinesmith@aol.com

[gaznovalet]

do you have pic of the sandwich plate as i have 2 in garage and will check if they are the same.

[Adam]

Gaznovalet-Do you have the part number on it???

[Steve]

"plastic vent duct that goes between the heater matrix housing " got one of them not 100% if its a mk1 or mk2, i'll get a pic of it.

[Courtnova16v]

rear door cards here

[Adam]

Pic of what i need, it goes between that middle vent, and the matrix housing
http://img.photobucket.com/albums/v86/Nova-crew/B571%20HTV%20WIP/DSCN1431.jpg

Also need the fusebox cover, and whatever panel goes below the heater control panel here, ashtray or something? Sorry i know f**k all about mk1 dashes lol
http://img.photobucket.com/albums/v86/Nova-crew/B571%20HTV%20WIP/DSCN1430.jpg

[Steve]

Yeah pretty sure ive got one of them sitting in the garage somewhere i'll have a dig. :thumb:

lol yeah the other bit is the ashtray, when I first got a mk1 I spent ages trying to find the ashtray but couldnt as it blends in too well!

[Adam]

Cool, i need fusebox cover, ashtray, and that heater duct then :)

[gaznovalet]

:thumb:
Gaznovalet-Do you have the part number on it???
yer adam the part number is 90322485 , let me know if its any good.

[Adam]

You dont happen to have the bolt that holds it to the oil pump too do you?

Will check the number on epc later :)

[gaznovalet]

yer i have the bolt aswell mate.

[Adam]

Sweet, how much do you want???

[gaznovalet]

is it the right one adam? as i cud add pic for you? £10 posted ok?

[draper]

ive got some rear cards adam, yours FOC if you want em pal

[Adam]

:thumb:
yer adam the part number is 90322485 , let me know if its any good.
No results for that number mate, but 90322484 is the cally/cav sandwich plate, with banjo fittings, which isnt the one i need. I assume with the number being close thats the type youve got too.

One i need is part number- 90194141


Draper-Going Nat day mate???

[gaznovalet]

here is the 2 sandwich plates ive got, the one on left is from an early xe and one on right is from a let.
http://i631.photobucket.com/albums/uu40/cossiegaz_2009/DSC00748.jpg

[draper]

no im not adam, however..............

i am going to meet john H at some point soon to pick a fuel tank up so....
providing its ok with him i could drop them off and then you can get them that way (somehow lol)

[Adam]

Thats sound Draper, I can just call round Johns sometime..... :) Cheers

Gaz, do you have any std oil cooler pipes that you can try on them?
The one i need has smaller threads than the later banjo type fittings.

[gaznovalet]

i dont adam i sold the oil cooler and pipes to my mate for his corsa, but i have got the blanking bolts wich fit that sandwich plate. . i cud measure the width of them threads if that wud be of any help to you?

[Rich]

ive got a couple of oil coolers laying around if thats any easier? Im just a bit far from you.

[Adam]

Any pics of them mate?
Ive got two coolers.

One fits the sandwich plate fine, but the pipes are too long so it doesnt fit a nova too well.
The other fits the car perfectly but dont fit my sandwich plate lol

[Adam]

i dont adam i sold the oil cooler and pipes to my mate for his corsa, but i have got the blanking bolts wich fit that sandwich plate. . i cud measure the width of them threads if that wud be of any help to you?
If you dont mind mate :)

Also, is there a part number on that Let one??? Looks different to the xe one on the left, so maybe thats an early type too...

[John]

Ad, the cooler you're wanting to use, is it the one i gave you? If it helps it's off a c20ne astra.

[Adam]

Yes mate :)

[John]

It's fooking typical isn't, i binned all the last bits from that scrap c20ne engine when i weighed that astra f in a couple of weeks back, including the oil pump and sandwich plate! They'd been in the shed for 2+ years!

[Adam]

lol lol
Its always the case






BUMP!!!! This bit is holding up starting the bastid engine! lol

[gaznovalet]

If you dont mind mate :)

Also, is there a part number on that Let one??? Looks different to the xe one on the left, so maybe thats an early type too...
the let one part number is 11961/1
and the diameter of the bolts wich fit are exactly 10mm. :thumb:

[Adam]

That sounds about right!!
Do you have the middle bolt thing that holds it to the oil pump???

[16v Nova Kev]

i have a brand new sandwich plate and bolts and maybe the bolt that holds it to the pump need to look tommorow

[Adam]

Let me know asap please mate

[16v Nova Kev]

just notised its the banjo bolts i have

[Adam]

:(
Thanks anyway

[gaznovalet]

adam av just checked the 2 sandwich plates i have and the one i removed from an xe engine wich is the one pictured on the left the diameter of the threads for banjo bolts is exactly 10mm. the larger of the sandwich plates wich came from a let engine has a thread diameter of 12mm, and yer i also have the bolt wich goes thruw the plate and into the block to screw filter on to.

[Ernie]

do you still need rear door cards mate as ive got a mint rear set you can have foc and can bring to the national.
I think i have a fuse box cover aswell.
I will dig them out and bring to the national.

[Adam]

Gaz, i may be sorted now thank to Philip. Cheers for all your help anyway :)
+rep


Ernie, draper has some for me, but he aint going Nat day, so if your willing give me some foc and are going nat day that will be sound!
Cheers :)



I still need the mk1 ashtray and the middle heater duct Lads :) :) BTTT

[gaznovalet]

thats good adam , pleased you got it sorted in the end pal . and mine are still ther shud you need them just let me know.

[draper]

Gaz, i may be sorted now thank to Philip. Cheers for all your help anyway :)
+rep


Ernie, draper has some for me, but he aint going Nat day, so if your willing give me some foc and are going nat day that will be sound!
Cheers :)



I still need the mk1 ashtray and the middle heater duct Lads :) :) BTTT

i dropped them off at john hs for you adam :thumb:

[novamad!!]

wot havent you got yet mate?txt or call me on 07971388941

[Adam]

Mk1 Ashtray
Middle heater vent ducting
Mk1 Steering column shrouds(if there different to mk2 ones?)
Fusebox cover

Cheers Draper

[Adam]

Top

[Ernie]

the steering collum bits are differant mate aswell as the bit they screw to behind the steering wheel but i think john left that bit on there.

[Adam]

I need those too then :( lol

Also urgently need a mk1 rear fog switch!!!


So the list is:
Fusebox cover
Ashtray
Heater duct
Rear fog switch
Column surrounds

Need the switch asap for mot....