View Full Version : automotive porn (18)
http://i241.photobucket.com/albums/ff314/b17ova/autosport2007_005mr.jpg
Tommy_nova
09-05-09, 10:15 PM
very nice how much ( borat voice )
General Baxter
09-05-09, 10:16 PM
its from the yanks, if its anything like there v6 and v8 its got 5bhp lol
its from the yanks, if its anything like there v6 and v8 its got 5bhp lol
From what ive read over 300 horses :D
And thats 2.0 not 2.2/2.4
blue_peg_16v
09-05-09, 10:18 PM
dunt look like 5bhp in world touring cars
Southie
09-05-09, 10:18 PM
Details and more spec Mr Bigs that looks tasty tasty very very tasty.
**** give me a day or two. i know i should of saved the link. took me three days to find it lol
Southie
09-05-09, 10:23 PM
Find the link you crazy fool lol the manifold has similar styling go your btcc one but not as big.
Find the link you crazy fool lol the manifold has similar styling go your btcc one but not as big.
Yea i will, its a good read tbh. And yes your right mine is bigger 1/2 " bigger :D
Hmmmmmm, you shoulda posted that in 18+ lol
Would look mint with an XE plug cover:thumb:
16v Nova Kev
09-05-09, 10:33 PM
that flywheel is like a rich tea bisquit lol
I can't figure out the inlet myself... looks like a trumpeted intake and air box, but the intake seems to actually connect closer to the head and in totally the wrong place to provide good airflow to the air box?
Why is there no oil feed from the front of the rocker cover?
stevie-p
09-05-09, 11:21 PM
it is a Chevrolet Lacetti WTCC engine and its built by RML
that is all i no lol
scott.parker
09-05-09, 11:34 PM
Give me that carbon TB closure box!
dj_wudgey
10-05-09, 10:37 AM
thats ace id love that in my gte lol
its from the yanks, if its anything like there v6 and v8 its got 5bhp lolyou tit. thats the c20xe they are using in the chevy touring cars
craig green
10-05-09, 11:09 AM
I dont reckon that exhaust manifold will clear the Nova's headlamps!
dj_wudgey
10-05-09, 11:27 AM
I dont reckon that exhaust manifold will clear the Nova's headlamps!
im sure i could make do with a differant manifould if i had that engine lol
But that manifold will be engineered to be the best possible shape to allow maximum flow and uber bhp, to make do with another you will almost definately lose a notciable amount of pony power!
dj_wudgey
10-05-09, 11:34 AM
i know but another would allow it to fit in a nova lol
easy that engine with my manifold, job done
boffer8
10-05-09, 11:52 AM
dont know if you chaps have seen this too, rebuilt in a QED alloy block
Very Nice
(http://cgi.ebay.co.uk/Vauxhall-2-3-16v-Paul-Exon-Race-engine-road-rally-race_W0QQitemZ350195118166QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item350195118166&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50)
Ive just jized in my pants lol
dj_wudgey
10-05-09, 11:57 AM
that xe on ebay looks good aswell not as nice the the chevolet xe though lol
t45_ste
10-05-09, 11:58 AM
Very good price aswell.
Hes had it on ebay a few times. People just dont seem to be spending the brass.
How's your engine coming on BIGS?
Me like! Id soon get that fitted into the 12 volt lol
Just collecting a few bits for it really. Its on hold till i get the rollcage in and get the car sprayed. But once that is done i dont know what to do. i was going to get it fully tuned then drive it. but not to sure now. Dont know to put the thottlebodies on the standerd engine to get used to that. then go for the race spec? Im thinking if i go from 113bhp to well 250 - 300 bhp i wont be used to the power.
But if i go from 113 to 190ish then to race spec thats the better way for me. What do you think?
let_nova
10-05-09, 01:01 PM
113-300 FTW just take it easy least that way your only getting used to one change and not two!
If I still had an XE, I'd be falling **** over tit to get me that spark plug cover.
scott.parker
10-05-09, 01:56 PM
If I still had an XE, I'd be falling **** over tit to get me that spark plug cover.
Jack, looking at it i think it might be a HT all in one plug in/cover as in it plugs into all the spark plugs and then has a cable coupled into the end of it??
Might be wrong, just looks that way, this would be cool! :thumb:
Scott
let_nova
30-06-09, 11:00 AM
bigs any more info on this?
im sure i could make do without a head lamp if i had that engine lol
Edited..
Yummy:thumb:
It's an RML built Chevy TC engine.
Reverse cylinder heads FTW IMO.
Now that it engineering.
ENGINE Vauxhall 16V engine developed by Swindon Racing
Engines
Reverse head 4 cylinder 1998 cc unit develops
290 BHP
The RML Cavalier accelerates from 0-60 mph in
under 4 seconds
The engine has a statutory rev limiter set at
8,500 rpm
The fuel is housed in a kevlar/rubber bag tank with
a capacity of 50 litres
http://www.johncleland.net/images/waugh/JohnCleland%20engine%20bay.jpg
Scroll right to the bottom lol WTF.
http://www.johncleland.net/mallock.htm
let_nova
30-06-09, 04:40 PM
but the one in the pic is chevrolet. ???
If I still had an XE, I'd be falling **** over tit to get me that spark plug cover.
gtemotorsport
let_nova
30-06-09, 04:56 PM
mayhem how do i pay for it with them? will they ship here?
dont know, never dealed with them, but the have a very good reputation here.
paypal mayhem the money and get him to ship it over?
BRoadGhost
30-06-09, 07:15 PM
As triumphant as the reverse head might appear to be, the results on the dyno AND the road were no different to the conventional inlet side setup.
From my perspective WHY bother when either way it's gonna be ram fed from a tapered inlet via the airbox.
Breather would be blanked off as it would be breathing via the dry sump system.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.