View Full Version : How low shall i go?
fitted my wheels on and it looks far to high how low shall i go ideally id like to slam it as much as i can, how low have others gone on 16" wheels?
http://i127.photobucket.com/albums/p130/Pillar_photos/Picture210.jpg
deanwilko
04-05-09, 07:23 PM
ive got some gmax springs and shocks not very old 60mill drop i could sell you if interested
mines on 16" and 100- ish.
What off set are the wheels, looking at it 60mm...
L33 LEG
04-05-09, 10:25 PM
get it as low as you can.
shed-on-wheels
04-05-09, 10:50 PM
slam her fella
skidmarkz
04-05-09, 11:10 PM
take ya sump off!
nacho mcnova
04-05-09, 11:21 PM
i would drop it 60mm on the front and 80mm or 90mm on the back, i would have the arches well rolled if i was you. how wide are your tyres bud?
sulphur
04-05-09, 11:31 PM
80 front, 100 back. Or try even tuck the wheels under the arch at the front, so that when lock is on the tyre has maybe 2-5mm clearance. This is how mine sits, and I reckon it's around a 80-100mm drop at front. :thumb:
L33 LEG
04-05-09, 11:33 PM
yours looks to be 100mm at the front lol its bloody low!
get some coilovers and lower it as much as your arches allow you to
sulphur
04-05-09, 11:35 PM
Not low enough mate :thumb: I'd have it lower if it would allow the wheels to turn lol Too high at the back too for my liking.
Go as low as possible, 80-60 would be a comfy ride height, and look sweet too. :thumb:
i would drop it 60mm on the front and 80mm or 90mm on the back, i would have the arches well rolled if i was you. how wide are your tyres bud? rear arches are rolled, tyres are 195/45/16 :thumb:
nacho mcnova
05-05-09, 09:24 AM
its more the fronts that you need to worry about i have 195/45/16 tyres on the front and never got the arches done and it rubs like fook especially on full lock, abit annoying when your trying to park. some coilovers may need spacers bud but i would double check as decent spacers aint cheep. heres a pic of mine 60mm all round and the handling is quality too.
http://i698.photobucket.com/albums/vv344/nacho-mcnova/newnova006-1.jpg
the rear would be nice slammed 90mm but you lose abit of handling, it depends if you want looks or performance bud.
L33 LEG
05-05-09, 10:15 AM
i disagree with that. when i put 100mm springs on the back on mine it handled amazing! it was like a go kart lol
ps that white nova looks ace
nacho mcnova
05-05-09, 11:08 AM
i have never had extra low springs on the back, i would of liked to but i was told off a club member you slightly lose handling but now i think i will need to try it for myself as im always looking for the best handling for my car. ps L33 LEG, have a look a my project thread.
nova_saloon
05-05-09, 11:12 AM
photoshop yourself some different heights! Then you can drop it as low sa you want and then decide after!
cheers for the pic nacho mcnova i would like the rear a lot lower though so i need 60 front and approx 80-100 rears i have found the front on ebay but where can i source such low rear springs from? or even better the lot together? or is adjustables the best bet? if so advice on them dont want to spend crazy money on it but i do really need to drop her
L33 LEG
05-05-09, 03:48 PM
coilsprings for the rear mate.
back end on nacho's looks 30-40mm to me...
back end on nacho's looks 30-40mm to me... god knows what mine are prob 25mm lol
coilsprings for the rear mate. where can i buy these from? :thumb:
mines on 16" and 100- ish.
What off set are the wheels, looking at it 60mm... ET 49 i think
http://i13.photobucket.com/albums/a266/razorjack/Cars/pillar.jpg
:D
The Simps
05-05-09, 07:06 PM
how much you looking to spend?
If you can stretch to coilovers its worth it. You can set the height as you wish, play around with spring & damper rates - the worlds your oyster!
its more the fronts that you need to worry about i have 195/45/16 tyres on the front and never got the arches done and it rubs like fook especially on full lock, abit annoying when your trying to park. some coilovers may need spacers bud but i would double check as decent spacers aint cheep. heres a pic of mine 60mm all round and the handling is quality too.
http://i698.photobucket.com/albums/vv344/nacho-mcnova/newnova006-1.jpg
the rear would be nice slammed 90mm but you lose abit of handling, it depends if you want looks or performance bud.
nice nova.
that really doesnt look like -60 to me.
with -60 my 15 inch was in the arch with the tyre.
this is how mine stands currently, front are coilovers, so i dont know about that, the rear is -80 but she's stripped out, its about as low as a normal nova with -60.
its on 14 inch banded steelies with 195-45-14
http://i30.photobucket.com/albums/c341/mayhem22/IMG_8200.jpg
dj_wudgey
05-05-09, 09:18 PM
get it as low as you can.
im with you dude!!
just need some info on these rear coilsprings can anyone help as in where i can get them? dont want the hassle of adjustables yet as dont know the plans for the car yet thanks
Rear on that white one cant be 60mm- looks like a std ride hight.
Cant find thier web site...
Is the wheels are a 49et (which they dont look)
You should be find with 60mm
Cant find thier web site...
Is the wheels are a 49et (which they dont look)
You should be find with 60mm gotta take them off tomorrow ill look again they say on the back
just need some info on these rear coilsprings can anyone help as in where i can get them? dont want the hassle of adjustables yet as dont know the plans for the car yet thanks
all springs on a nova are coilsprings, but he wasn't just stating the obvious, www.coilsprings.co.uk is the company lol
Ah its the s that makes the difference...lol
all springs on a nova are coilsprings, but he wasn't just stating the obvious, www.coilsprings.co.uk (http://www.coilsprings.co.uk) is the company lol thought he might be on about some springs that have been extra compressed custom springs as i cant find any so low :thumb:
Nah low springs are just less coils generally, but obviously much thicker so they don't bottom out, 100-120mm drop springs just look kinda like pigs tails, 1 1/2 coils or so lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.