View Full Version : 1300sr into 1.0
MattBrown
28-04-09, 11:16 PM
Hey up
Picking my 1.3sr engine up on sat:thumb:
Whats it need to GO in my 1.0?
The wiring seems piss
But isnt there a gearbox mount or something?
:thumb: :thumb: :thumb:
Drivers side engine mount is different. You need a mount off any ohc Nova 1.2-1.6. Just the mount, the mount point on chassis is same.
Wiring is straight forward, maybe have to swap one or two starter connections iirc.
kent14sr
29-04-09, 12:32 PM
Black wire from existing coil needs rewiring with a normal bit of wire as the 1.0 has an inbuilt resister that drops current. Tape up green wire
I changed the wiring that goes from battery positive to starter and alternator as well to the one from 1300.
Otherwise everything should be there
you will need the gearbox too as the bolt sizes are different.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.