PDA

View Full Version : HELP! Tapping noise coming from engine ( nova sr)



sr nova boi
23-04-09, 09:31 PM
Hi everyone, two days ago my nova sr started to make a loud clicking/ tapping noise that sounds as if its coming from the distribitor cap? its running really rich all of a sudden and drives as rough as a dog! :roll: any help with this would be greatly appreciated, cheers rob

nova_saloon
23-04-09, 09:32 PM
you pulled the distributor apart? have a look inside might be something loose, could do with replacing the parts to

Southie
23-04-09, 09:38 PM
Sounds like it could be the advance vacuum part that is dome shaped on the distributor. They tend to wear after time. It could need replacing but it's a fiddly job. Usually easier to get hold of another distributor.

GRUNT 16V
24-04-09, 10:41 AM
Check Your Camshaft Lobes For Wear As The 1.3 Were Prone To Wear

burgo
24-04-09, 09:34 PM
mine started clicking as a spring had fallen out of the advance mech inside. i removed the lob it was attached to and all good :)

sr nova boi
25-04-09, 06:29 PM
mine started clicking as a spring had fallen out of the advance mech inside. i removed the lob it was attached to and all good :)

How do i do that? amateur here!

nova_saloon
25-04-09, 06:34 PM
you got a haynes? comes in handy for lookign at blow up diagrams of the htings your taking apart and advice on how to do it.

sr nova boi
27-04-09, 06:56 PM
after checking again the noise is actually coming from the head, under the oil cap?! any ideas guys?

mowgli
27-04-09, 07:36 PM
the hydraulic tappets?? the camshaft??? the fuel pump??

soup1
27-04-09, 08:09 PM
more than liokely the cam lobes worn, tends to happen to the lobes
for cyl no4

dougie_boi
27-04-09, 08:21 PM
i know this sounds daft but have you checked the oil level im not saying anything bad but just to check things that can lead to rattly tappets

kent14sr
27-04-09, 08:32 PM
check distributor cap and rotor arm - often when rotor arm starts wearing and burning out it shorts out and makes a loud tapping type noise

tonysxr
30-04-09, 02:47 PM
how loud,my mate bought a 1.4sr 5 years ago a week later took it out when it was cold,without a license so didint really have a clue how to drive,ragged it and snapped a rocker arm,it needed re building(engine),but that was really loud when it went