Arch Rolling Problem

[mikeoxford]

ive got a problem with my arches

when they were rolled previously and sorted etc, the geezer filled one side, but left the other side just follded and never fillered, how can i clear out the upturn lip before i seal it with mastic or filler etc?

i wana make sure i get as much out as poss, theres some underseal, some mud and some other random sh!t there, cant fit a pressure washer in or anything - do i just scrape it?

[Ben (lurk75)]

one easy way is to remove the wheel and get a compresser and just give it a blast with some air to clear out all the debris youve got lodged in there. before that just get a small stiff brush and give it a good brushing.

[ade]

as ben says - or, depending on how wide the fold is, get a metal implement or sprts (them things horsey people use to crape the sh1te out of horses feet are good) and drag it along the channel.

Basically a sturdy bit of bent metal with the end ground down eniff to get in the gap. Then, blast with air (wear goggles), brush and seal.

THEN - go back to garage and kick the ass of the guy that did it!

:D

[?Marty?]

Do as ADE say's, but go kick the ass first! or they'll say 'what you talking about mate, there's nothing wrong with them arches'. Yeah, not anymore!

[Anton]

yup go to a garage and use there air gun :D