Pics Required

[Cle]

Need pictures of a front panel change, I.e where to cut and where to weld :thumb: Thanks

[CoolTiger]

full or bottom or top

[bmw156]

i want these also :>:>

full change for me

[Cle]

Full change :thumb:

[Benn]

You can see quite alot of the spot welds here, as this guys raped his off.
http://www.migweb.co.uk/forums/projects-restorations/358054-old-skool-1-2-runabout-2-0-8v-4.html#post3989672

Dont go hammer and chisaling it tho, spot weld drill and a grinder/cutter is whats needed.

[BIGS]

Have a look through this

http://www.pngclub.com/forum/showthread.php?t=110326

[Cle]

Any more pics ?? the more the better

[~~joycey~~]

You can see quite alot of the spot welds here, as this guys raped his off.
http://www.migweb.co.uk/forums/projects-restorations/358054-old-skool-1-2-runabout-2-0-8v-4.html#post3989672

Dont go hammer and chisaling it tho, spot weld drill and a grinder/cutter is whats needed.


Is that steves?

[Benn]

Is that steves?

Think so, 2lt 8v, in yellow..

[vx kev]

Mark all the points on the old one before you take it off! It should just be spot welded in so once marked just drill out the spot welds, remove sealer etc. and pull it off all being well!
Thats how i done mines anyway, placed new one on and lined it all up. Put a few screws in to hold it in place and the placed all the panels (wings, bonnet etc.) back on to make sure everything lined up.
Once happy, welded away :thumb: