PDA

View Full Version : Door pins where do i get them/



P Whack
19-04-09, 08:09 PM
Just been to my local vauxhall dealer and they no longer sell nova door pins, dont know if she was looknig at the right part tho, anyone know where i could get some from? or the part number?

Mike
19-04-09, 08:21 PM
Get some from my house lol

Jack
19-04-09, 08:49 PM
Matt2107 has a load of pins. PM him and see if he'll send you some.

Dave.
19-04-09, 09:09 PM
didnt someone on here once use newer ones off an astra or vectra?

slightly longer iirc but did the job

brainsnova
19-04-09, 09:10 PM
fit later cavalier etc pins as they are much easier to remove.

twistysnovagte
19-04-09, 09:45 PM
im sure i heard this from colin(novarally) correct me if im wrong,that its alot easier to use nut and bolt of the same diameter(m8 or summat around that size)just cut them down to length, thats if your not to fussy,then its a piece of pi.. to remove when and if you have to.

Dave.
19-04-09, 09:48 PM
im sure i heard this from colin(novarally) correct me if im wrong,that its alot easier to use nut and bolt of the same diameter(m8 or summat around that size)just cut them down to length, thats if your not to fussy,then its a piece of pi.. to remove when and if you have to.

i might actually do that! lock nuts and bolts ftw! :thumb:

P Whack
19-04-09, 11:40 PM
Thats what i was thinking if its the same diameter than it will work fine but does anyone know? ill get some door pins and a m8 and a nut and ill find out lol

amggsi
20-04-09, 02:09 PM
Cut down spouting bolt is what you need, never fails!!!

NovaBoi92
20-04-09, 02:12 PM
i got brand new pins from vauxhall

P Whack
20-04-09, 02:22 PM
Do you know the part number for them?
cheers
pete

NovaBoi92
20-04-09, 02:28 PM
no sorryi just asked for door pins for a nova and they had them. alot of the people i talk to at vauxhall are fairly useless, so if they say we dont have any door pins, try asking them to order some in. tehy never really think of that themselves

AlexW
20-04-09, 02:32 PM
If i remember in a bit il check my EPC, get ya the part number.