1.6 E/C16SE round port inlet manifold for 40's

[John]

as per title, what you got?

[John]

bttt!

[gregvaux]

i have 1 but its was on my 1.4 sr so its d type you can have it for £55 pict up pal
from leigh wn72bb 07765636613

[John]

i have 1 but its was on my 1.4 sr so its d type you can have it for £55 pict up pal
from leigh wn72bb 07765636613

can you post some pictures for me please?

[John]

bttt.

[John]

bttt

[John]

bttt.

[John]

bttt.

[Adam]

http://www.pngclub.com/forum/showthread.php?t=119384

[John]

ta mate, again a little out of my budget. Cheers for the link too Tom, i bloody missed it though lol.

Bttt.

[John]

bttt.

[Dirtydog1]

i have the comlete package mate, manifold, linkage, carbs, high lift cam and 1.4 se head with valves re-seated new seals etc plus the dizzy and coil. i was going to bolt the lot onto my 16se bottom end.

[John]

Thanks, only need the manifold though.

[Dirtydog1]

il ask around, alot of my mates have ditched carbs to follow the fashion trend of xe's and let's so you may be in luck!

[Dirtydog1]

ps you may well be able to help me out actually! do you still have the injection manifold?

[John]

yeah i still have the manifold, but i wanna keep it really.

[Dirtydog1]

i am just after a the sensor that screws into the right hand side at the bottom of the manifold. it has a 2 pin plug. goes it that sort of ally box that the temp sensor for the dash screws into.
bit of an odd request but i dont know what its called or what it does. all i know is mine is snapped off! lol still drives with out it though.

sorry to gate crash your thread by the way, il ask a couple of mates about the 40s manifold later

[John]

I have a c16se mate, they're different. Ok cheers.

[John]

bttt.

[John]

One last go before i give up!

bttt!

[John]

bttt.

[John]

again

[John]

No longer needed :(