View Full Version : X16XE Vacume Pipe Help!!
Hai lol
SO I have the X16XE running and all going sweet but it hesitates on starting so I'm thinking this may be to fo with the numerious Vacume hoses laying all over the place. Could someone please photograph where their pipes come from and go to as the car runs like a bag of sh1te at the minute.
Dont know if these are any help
http://i241.photobucket.com/albums/ff314/b17ova/vauxhall%20photoshoot/S5030002.jpg
http://i241.photobucket.com/albums/ff314/b17ova/vauxhall%20photoshoot/newnova013.jpg
http://i241.photobucket.com/albums/ff314/b17ova/dansnewpics075-1.jpg
http://i241.photobucket.com/albums/ff314/b17ova/dansnewpics076-1.jpg
Yeah mate, they're sweet!! Where does the hose from the FPR go to? Also, theres a small black Box with 2 wires plugged into it and what looks like 2 Vacume hose inlets on it, where do they go? I also found a Vacume Hose inlet on my Brake Servo Pipe.
I think i know what you mean. ive got to go now but ill take pics or find what others i have tonight for you
BIGS sir, you are a Gent!!
Southie
06-04-09, 04:11 PM
Mine are off the C16 but I think its pretty much the same :D
http://i345.photobucket.com/albums/p379/SOUTHIE01/IMG_0356.jpg
http://i345.photobucket.com/albums/p379/SOUTHIE01/IMG_0355.jpg
Cool, so FPR goes off into the Inlet, the box type thing goes into the inlet as well and the thrid one goes where? Presumably the Brake Servo?
Southie
06-04-09, 04:27 PM
Cool, so FPR goes off into the Inlet, the box type thing goes into the inlet as well and the thrid one goes where? Presumably the Brake Servo?
I have the same problem with the third pipe on mine but its not connected. :(
it goes to the charcoal canister lads, just stuff it into the chassis leg.
Where does the one from the Brake Servo go to?
If you look at the last pic i posted. It shows the servo in the right of the pic. follow he hoes that comes off it!
lol just as i was having problems with mine lol
The little black box is the fuel vent valve thing, so carbon canistor. Mine is just blocked off but with the wiring still connected so i dont get any more ECU lights.
Yeah BIGS but I dont have that hose and cant really tell where it goes. lol
Any light to be shed?
Any advancements made since people?
Ive just took a better pic of the servo vacum hose. is it anything else you want a pic of before i upload them
No tar mate, that should be it til next time. lol
in a nova all you need is the MAP sensor and Fuel Pressure Reg connected.
The nipple on the front of the inlet goes to the rocker cover.
4th one can be blanked as this is for the Fuel Tank Vent Valve (red 2pin connector) this can be completely blanked off (no vacuum connections at all)
then your main brake servo pipe onto the inlet. if the one way valve has any nipples these can be blanked as a nova will not need them (air con and SAI on corsa use them)
Cheers CK. I know this is gonna get me in trouble, but I put the engine back into a Corsa!! My SAI has however been removed completely so basicially I have the same set up as BIGS and NOVABIKECARB have.
So in summery, if I go by what I've already said and just block the Brake Servo Vacuem, that should be it?
Hope these are ok
http://i241.photobucket.com/albums/ff314/b17ova/the%20saloon/Picture061.jpg
http://i241.photobucket.com/albums/ff314/b17ova/the%20saloon/Picture062.jpg
Cheers BIGS. On a seperate note, does the Rubber hose safice on the Barke Sevro? I've had aweful trouble trying to bend and reshape mine.
Umm dont know. The one thats on it ck fitted for me
Spot on so mate, thanks to all for the help.
Southie
08-04-09, 06:53 PM
Good question Dod. I could also do with knowing if the rubber pipe will be adequate as I've used samco hosing instead of the plastic pipe. Just not sure if it will be okay. I've not had mine out yet to try lol
Ive just thought, he did change it because it was a rubber hose before and said it needed to be a plastic one
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.