View Full Version : jetts webber 40's
dj_wudgey
02-04-09, 10:56 PM
i have a full set off jest but im unsure off what engins size they are for doe's any one know how to figure this??
any help will be apriciated! thanks!!
chimp007_uk
02-04-09, 11:06 PM
not always as simple as saying what "engine size" depends on carbs and whats been done etc. You can get a rough rough ball park figure
dj_wudgey
02-04-09, 11:45 PM
ohh ok i didnt know that chimp well lads there are afew number on them
right on the nut screwed in to the long bits (very technical lol) has 125 on it
the actual big bit has f9 on it
right at the very bottom off the same big bit it has 200 stamped on it
the smaller bits with the big lobe in the middle has 35 stamped on it
and the smalles bits off all off them has 50f8 on it sorry if its confusing
but thanks again!!
chimp007_uk
02-04-09, 11:49 PM
Try this :) (http://www.fordcaprilaser.co.uk/images/jet_assembly.gif)
dj_wudgey
03-04-09, 12:02 AM
Try this :) (http://www.fordcaprilaser.co.uk/images/jet_assembly.gif)
thanks pal
on the retainer it has 125
on the emulsion tube it has f9
and it has 200 on the main jet
chimp007_uk
03-04-09, 10:34 AM
200 is pretty big, my brother's running 45's on his 2.1 8v and thats got 200 air correctors, F16 emulsion tube and 145 mains. That had an air fuel ratio of 9.8:1 at its richest point :eek:
Its being rejetted and balanced next week.
they sound like there jetted for a 2.2 upwards, god knows what!!!!
dj_wudgey
04-04-09, 05:31 PM
gutting that well i have got no use for them lol
thanks any way lads!!
rubachuk
04-04-09, 06:33 PM
This might be useful: http://web.archive.org/web/20050321215134/hometown.aol.com/dvandrews/webers.htm
dj_wudgey
05-04-09, 11:38 AM
thanks allot lads all help apriciated!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.