PDA

View Full Version : injection fuel tank



jas2000000
28-03-09, 06:54 PM
i have just put a gte engine into my mk1 nova which was carbed before. had a hole in the old tank so thought i would get a brand new gte one.

the problem is the pipes are different! anyone got a diagrem where they go?

cheers

gazjoiner
28-03-09, 07:06 PM
no, i havent! but the pipe at the back of the tank in the middle should be a larger dia iirc lol, thats the outlet pipe that connects the ext pump. do you have an ext pump?

bola
28-03-09, 09:44 PM
Basically it goes from the end of the tank facing the rear of the tank to the pump, then the pump to the filter, then the filter to the hard pipe nearest the drivers door, then to the fuel rail. return is opposite obviously. pm me if you need any more info mate ive just done this.

gazjoiner
28-03-09, 09:49 PM
Basically it goes from the end of the tank facing the rear of the tank to the pump, then the pump to the filter, then the filter to the hard pipe nearest the drivers door, then to the fuel rail. return is opposite obviously. pm me if you need any more info mate ive just done this.

indeed :thumb: thats it!. more helpfull than my lame answer lol

mowgli
29-03-09, 10:19 AM
with a gte type tank, you need the gte type fuel sender, cos this has the fuel feed pickup pipe built into it.