PDA

View Full Version : C20XE Crank Cog / Pulley...


ste193
16-03-09, 06:53 PM
Im in desperate need of a C20XE crank cog / pulley. Its the 1 that the cambelt sits on, mine has split on the locating key. :mad:

Number 5 on here...

http://www.geocities.com/sb_scottmonkey/timing_belt1.jpg
vx kev
16-03-09, 09:23 PM
Is it for a later engine with square toothed belt or the earlier round toothed belt?
ste193
16-03-09, 09:28 PM
Earlier with the round toothed belt!

Cheers!
16v Nova Kev
17-03-09, 10:22 AM
i have one bud round tooth
you have pm
vx kev
17-03-09, 06:18 PM
Earlier with the round toothed belt!

Cheers!

Only got square toothed ones lying about :confused:
ste193
17-03-09, 09:14 PM
Thanks lads but ive ordered 1 from Vauxhall today, £54.20.

Thought it would be best to put a new 1 on as its not a part you want going wrong!
ste193
19-03-09, 07:50 PM
Im still in need of one of these (part 5 on the diagram above) and the collar behind (part 8 on the diagram), im in "desperate" need!!

I ordered one with vauxhall on tuesday and they said it would be here today, so i rung them today and they said there isnt any in stock in this country, so they've ordered one from Germany..... BUT it wont be here for 7 - 10 days!!!

Im booked in on a rolling road set up on monday so im desperate for this!

Anyone help?

Ive also been told it maybe the same part on the 2.0ltr 8v engine and maybe the same as the 2.5V6?

Anyone know if this is true?

Thanks!!
ste193
19-03-09, 11:23 PM
Any ideas?
ck
20-03-09, 12:49 AM
i have one but its a pain to get off the engine lol.

an early 2ltr 8v one may fit. one which has no tensioner on the oil pump should be round tooth set up so may have the same pulley
paul4amie
20-03-09, 08:29 PM
Ive got 1 mate still got double v pulley on but can remove that for you. £40 im located Milnthorpe Cumbria.
http://i261.photobucket.com/albums/ii45/paulmase/DSC00752.jpg
Pistol Pete
21-03-09, 04:44 PM
lol ^ didnt need it then??
paul4amie
21-03-09, 05:27 PM
lol ^ didnt need it then??

no mate got whole new engine in end, so now im stuck with two redtops breaking, lol.
ste193
21-04-09, 07:11 PM
Well after my local Vauxhall dealership messing my order up twice and then waiting another 10 day to get told by my local Vauxhall that Vauxhall dont make these anymore!

Does anyone have one of these Crank Cogs for the C20XE (redtop), must be the early type with the rounded teeth and i could also do with the Collar that sits behind the cog.

The Cog is part number 5 and the collar is number 8 in this diagram:

http://www.geocities.com/sb_scottmonkey/timing_belt1.jpg


HELLLLPP! :thumb:
timbo1980
21-04-09, 07:20 PM
try autovaux got 1 last year for my let,wasnt expensive
Rich
21-04-09, 07:33 PM
sure i sent you a pm before, think i have one at work ill check tomorrow for you.
ste193
22-04-09, 08:01 PM
sure i sent you a pm before, think i have one at work ill check tomorrow for you.

Any luck mate?
Benn
22-04-09, 08:17 PM
Have you got one? If not i have an early one here.
ste193
24-04-09, 08:54 PM
Managed to get 1 today, thanks anyway!