View Full Version : swaping clocks
hi, i want to install a set of clocks with a rev counter into a MK1 merit but im not sure which ones to go for and how much work is involved. any suggestions/advice will be much appriciated. :D
the fitting of a six dial dash is easy peasy. you need to run a wire from your coil to connect to the rev counter, and you need to fit a oil pressure sender/switch assy and then run a second wire for the oil gauge. the haynes book wiring diagrams will help a lot.
If your merit is a 1.2 4 speed, then the diff is the same ratio as the GTE so use the GTE dash, If you have fitted a different box ie. from an sr then use that dash.
Cheers MOWGLI
i understand the first bit but im confuzzled about the last part. :?
What gearbox you run decides what speedo you use
i see... i have a four speed. what speedo do i use?
sh!t, i just re-read what you first wrote. sorry im still half asleep. i understand what you mean.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.