PDA

View Full Version : C14SE Engine...


Pistol Pete
04-03-09, 05:56 PM
EDITED:

Manifold details are now in "My parts for sale" thread. I had too many threads running. :)

See here: http://www.pngclub.com/forum/showthread.php?t=117393
Pistol Pete
05-03-09, 05:11 PM
bttt

Ahhh bugger. Forgot to get old clocks out...will do it tomorrow.
Nobby
05-03-09, 07:37 PM
does it come with everything needed get it running??
Pistol Pete
05-03-09, 10:23 PM
As far as i can remember, yes. Will need loom confirming. I will dig it out for you tomorrow and confirm, if you are interested??
Pistol Pete
08-03-09, 01:12 PM
bttt
Pistol Pete
10-03-09, 03:01 PM
bttt
Pistol Pete
11-03-09, 01:12 PM
bttt

Got a new loom for my C20XE conversion today (cheers Ernie). So this will come with complete loom/ECU. Will have some old joins as removed my Clifford loom.
Pistol Pete
12-03-09, 03:44 PM
bttt
corsa-xe1
12-03-09, 07:59 PM
wanna sell the 4 branch on its own?
Pistol Pete
12-03-09, 08:16 PM
Yhpm
Ernie
12-03-09, 09:13 PM
if you need some outer cv's mate grab a set tomorrow from my yard..
Pistol Pete
13-03-09, 03:38 PM
bttt

Cheers mate will let you know.
Pistol Pete
14-03-09, 12:15 PM
bttt
Pistol Pete
15-03-09, 11:26 AM
bttt
Pistol Pete
16-03-09, 10:48 PM
bttt
shane 08
18-03-09, 06:31 PM
hi mate realy interested u take 90 for the lot??
Pistol Pete
18-03-09, 06:41 PM
Hmmmm...i'll let you know.

I am going to get this out and more than likely split the head from the bottom end. It has been stored for a while and upon closer inspection may need some TLC before it will run again. I will post up details and pics when i get them/it.
Pistol Pete
19-03-09, 07:46 PM
bttt
Pistol Pete
20-03-09, 03:26 PM
bttt

First posted edited with new pics/info. Will get the mileage ASAP.
corsa-xe1
20-03-09, 09:58 PM
have you got the loom and ecu with the engine mate?
Pistol Pete
21-03-09, 12:45 PM
It does say in my original post...yes, the ECU and loom will come with the engine.
Pistol Pete
21-03-09, 08:39 PM
bttt
Pistol Pete
22-03-09, 04:04 PM
bttt
Pistol Pete
23-03-09, 12:31 PM
bttt

Offers?
Pistol Pete
24-03-09, 12:18 PM
bttt
amggsi
24-03-09, 05:54 PM
Do you know if the manifold will fit an E16SE engine? (some of them seem to be longer than others, and I need something to match up to my s/s system!)
Pistol Pete
24-03-09, 06:07 PM
I think they do. Maybe ask in mech section? I had a look on tuning.co.uk the other day and they list SRi/GSi together. This would go great with your s/s system, i had it mated to a Magnex system (no, its not for sale lol)
Pistol Pete
25-03-09, 03:07 PM
bttt
novabrad90
25-03-09, 04:08 PM
just wondering m8 where u got your induction pipe from?
Pistol Pete
25-03-09, 04:11 PM
Bought it from a mate. He had it kicking about in his lock up. You want it? No-one seems to want the engine so may jsut aswell flog the bits....
Pistol Pete
26-03-09, 09:49 AM
bttt
Pistol Pete
27-03-09, 01:44 PM
bttt
novabrad90
27-03-09, 06:44 PM
no sorry m8, if it was red i would be interested
Pistol Pete
29-03-09, 09:12 PM
bttt

Manifold provisionally sold.
Pistol Pete
31-03-09, 01:48 PM
bttt
D11 OVA
31-03-09, 01:57 PM
is it a 1.4?
Pistol Pete
31-03-09, 02:01 PM
Yes.
D11 OVA
31-03-09, 02:02 PM
8v or 16v and does it run?
Pistol Pete
31-03-09, 02:06 PM
Dont take this the wrong way, but have you even read the first post? All the info and answers you need are there. Thanks.
D11 OVA
31-03-09, 02:08 PM
i did but not properly lol soz nah not interested
Pistol Pete
31-03-09, 02:09 PM
Wtf?
KSRY
31-03-09, 02:25 PM
So is it all good to go? (sorry you never confirmed either way)

Mileage? (as again, didn't confirm lol)
Pistol Pete
31-03-09, 03:15 PM
I have confirmed as far as i can without taking it to pieces....See my edited first couple of posts.

Mileage is 141k.
KSRY
31-03-09, 03:50 PM
So you did, may be interested, will let you know!
Pistol Pete
31-03-09, 03:52 PM
Ok, no worries.
Pistol Pete
01-04-09, 05:15 PM
bttt
Pistol Pete
02-04-09, 05:06 PM
bttt
Pistol Pete
03-04-09, 04:32 PM
bttt
Pistol Pete
04-04-09, 06:07 PM
bttt
Pistol Pete
05-04-09, 02:34 PM
bttt
ednovasr2
06-04-09, 01:30 PM
if can't get a carb under £40 maight buy this engine to replace my 1300sport lump!
Pistol Pete
06-04-09, 01:35 PM
Ok. Keep me posted!
Pistol Pete
07-04-09, 03:22 PM
bttt
Pistol Pete
08-04-09, 11:04 AM
bttt
Pistol Pete
09-04-09, 02:22 PM
bttt
General Lee
09-04-09, 02:52 PM
Hi pete,

Might be interested, only thing thats putting me off is mileage. But ill get round that so all in all, it comes with pretty much everything to get running, and you would take £90. Im only in Reading so i could pick it up this weekend if that would be ok.

cheers
Nath
Pistol Pete
09-04-09, 03:00 PM
PM replied. The engine loom is out and ready to go with the car. I was going to take out the car loom aswell, but havent got round to doing that yet.
Pistol Pete
10-04-09, 10:00 AM
bttt

Engine provisionally sold, pending collection and payment. Manifold still here....
Pistol Pete
12-04-09, 12:03 PM
bttt

Engine sold. Manifold still here..
Pistol Pete
13-04-09, 10:51 AM
bttt
Pistol Pete
14-04-09, 01:26 PM
bttt
Pistol Pete
15-04-09, 12:16 PM
bttt
Pistol Pete
16-04-09, 04:47 PM
bttt
Pistol Pete
17-04-09, 05:22 PM
bttt
Pistol Pete
19-04-09, 11:50 AM
bttt
Pistol Pete
20-04-09, 08:19 PM
bttt
Pistol Pete
21-04-09, 07:41 PM
bttt
Pistol Pete
22-04-09, 08:09 PM
bttt
Pistol Pete
23-04-09, 05:25 PM
bttt

I should be going to Castle Combe saturday if anyone wants to collect.
Pistol Pete
27-04-09, 07:56 PM
bttt
Pistol Pete
29-04-09, 06:35 PM
bttt
Pistol Pete
30-04-09, 12:54 PM
bttt