xe wiring

[DAN-F]

just put an xe in my t reg sxi today and the wiring is confusing me
i normally take a blue/red wire to the fuel pump but the loom i have doesnt have a blue/red wire does anyone know which ones of the wires in the pic is for the fuel pump
can i run the pump direct from the red/blue wire on the relay

and is a 1.2 16v sxi fuel pump ok to run an xe?

http://i303.photobucket.com/albums/nn152/DAN-F/ABCD0020.jpg

http://i303.photobucket.com/albums/nn152/DAN-F/ABCD0002.jpg

http://i303.photobucket.com/albums/nn152/DAN-F/ABCD0004-3.jpg

http://i303.photobucket.com/albums/nn152/DAN-F/ABCD0001.jpg

[Edited on 27-02-2009 by dan-xe]

[Sloth]

the wiring for the f/p and other stuff is on the 1.2 16v is at the side of the glove box, and yes the std pump will run the xe.

[Novasport]

F***ing Scotchlocs, you need to be shot! Get a soldering iron & some heat shrink FFS.

[DAN-F]

i dont need the wiring on the car side i need to know which wire it is on the engine loom i havent got a blue/red wire, well there is one on there but its cut and it doesnt attach to the loom just hanging of a connector

[DAN-F]

anyone know which wire on the engine loom could be for the fuel pump instead of the usual red/blue

[meritlover]

F***ing Scotchlocs, you need to be shot! Get a soldering iron & some heat shrink FFS.

i know. im glad someone said something before i did.

first damp morning, when theyve got green growing over the contacts, there will be several threads asking why it wont start.:roll:

[Sloth]

the red blue should be on a plug on its own. its slightly thicker and comes from the fp relay

[burgo]

DAN you should be banned for butchery like that

[ck]

looks like the last pic the connector on the right hand side with a single wire. or if not go straight off of the bottom of the fuel pump relay..

[DAN-F]

DAN you should be banned for butchery like that
Them scotchlocks are nowt to do with me its how the loom came to me thats why i can work out the wiring lol

[Ernie]

Ive wound wires together before now but that was just to get the car up and running.Once that was sorted ive always soildered the connections.
I did some work on a mate's car before now untill the point were my hand was stuck under the dash with 12v's going through it as there was a live wire behind the dash and was earthing through me.
I refused to work on it after that.
He bought the car like it or i would of slapped him.