Changing engine?

[kingrob]

Alrite im gonna be changing my engine within a couple of months and i was wondering if any1 know a decent place i can get it done from around herts, beds or bucks? How much roughly would it cost for a 1.0 - 1.4 conversion do u lot reckon?

Cheers Rob

[Chris LR]

Not considered a DIY swap?

[kingrob]

I aint really got a clue wot i'd be doing mate. If theres any1 who knows wot there doing and is willing to help, that'll be great???

[Chris LR]

if you get hold of a set of tools, a willing m8, there are 4,500 of us, surely a couple will want to help.

[Chris LR]

You'll need a Haynes as well.

[kingrob]

Well i got a haynes, so thats a start, lol. Well surely a few of ya out there could give us a hand to do it? Aint yet anyway in a couple of months. So if any1 is willing to book a couple of days in there diary id be grateful. Obviously need at 1 least person who knows wot there doing tho. lol :P

[Chris LR]

Well in a couple of months this post will probably have turned into a guide of how to change an engine.

1. Pop bonnet catch

[ollster]

lol at Chris

The haynes manual makes me laugh, quote "use judicious manipulation" really translate's to hit with big hammer.

[Chris LR]

I reckon you could run it like Word association, the stages in which you remove and refit an engine.

It is a hard thing to do if you don't know what your doing. Rob's sensible enough to know when he's beaten, I just think that it'd be better if you do it yourself.

[mikeoxford]

lol i found a translation guide a while back of haynes trnslations similar to that olly

wish i had kept the link was quite funny

things like remove carefully and retain spring - pull off and watch for fying object hurtling across room - obiously better than that tho :oops:

think it was vauxnova.co.uk

unsure

[Chris LR]

Yeah guides on Vauxnova.

[ollster]

Yeh i think that i have seen that beofre mike, the problem with the haynes manual is that they are working on a new car, its a whole different ball game when you gotta deal with rusty bolts n ting. Adds to the fun i think :)

My favourite tool is my sykes-pickavant nut splitter, that got some use when i did my suspension :wink:

[Chris LR]

Don't u mean Big fcuk off lever and even bigger fcuk off Hammer?

[ollster]

no ive got a proper hydrualic jobbie, but your right a hammer is just as much fun :lol:

[Chris LR]

If it's not broke, it's soon gonna be!'

[dave.gsi]

page wouldn't link..........so i copied it lol

www.vauxnova.co.uk

Haynes manual for beginers

Haynes: Rotate anticlockwise.
Translation: Clamp with molegrips then beat repeatedly with hammer
anticlockwise.

Haynes: This is a snug fit.
Translation: You will skin your knuckles!

Haynes: This is a tight fit.
Translation: Not a hope in hell matey!

Haynes: As described in Chapter 7...
Translation: That'll teach you not to read through before you start,
now you are looking at scarey photos of the inside of a gearbox.

Haynes: Pry...
Translation: Hammer a screwdriver into...

Haynes: Undo...
Translation: Go buy a tin of WD40 (catering size).

Haynes: Retain tiny spring...
Translation: "Jeez what was that, it nearly had my eye out"!

Haynes: Press and rotate to remove bulb...
Translation: OK - thats the glass bit off, now fetch some good pliers
to dig out the bayonet part.

Haynes: Lightly...
Translation: Start off lightly and build up till the veins on your
forehead are throbbing them re-check the manual because this can nott
be 'lightly' what you are doing now.

Haynes: Weekly checks...
Translation: If it isn't broken don't fix it!

Haynes: Routine maintenance...
Translation: If it isn't broken... it's about to be!

Haynes: One spanner rating.
Translation: Your Mum could do this... so how did you manage to botch
it up?

Haynes: Two spanner rating.
Translation: Now you may think that you can do this because two is a
low, tiny, 'ikkle number... but you also thought the wiring diagram
was a map of the Tokyo underground (in fact that would have been more
use to you).

Haynes: Three spanner rating.
Translation: But Nova's are easy to maintain right... right? So you
think three Nova spanners has got to be like a 'regular car' two
spanner job.

Haynes: Four spanner rating.
Translation: You are seriously considering this aren't you, you pleb!

Haynes: Five spanner rating.
Translation: OK - but don't expect us to ride in it afterwards!!!

Haynes: If not, you can fabricate your own special tool like this...
Translation: Hahahahahahahahahahahahahahahahahahahahahahaha!!!!

Haynes: Compress...
Translation: Squeeze with all your might, jump up and down on, swear
at, throw at the garage wall, then search in the dark corner of the
garage for whilst muttering "bugger" repeatedly under your breath.

Haynes: Inspect...
Translation: Squint at really hard and pretend you know what you are
looking at, then declare in a loud knowing voice to your wife "Yep, as
I thought, it's going to need a new one"!

Haynes: Carefully...
Translation: You are about to cut yourself!

Haynes: Retaining nut...
Translation: Yes, that's it, that big spherical blob of rust.

Haynes: Get an assistant...
Translation: Prepare to humiliate yourself in front of someone you
know.

Haynes: Turning the engine will be easier with the spark pugs removed.
Translation: However, starting the engine afterwards will be much
harder. Once that sinking pit of your stomach feeling has subsided,
you can start to feel deeply ashamed as you gingerly refit the spark
plugs.

Haynes: Refitting is the reverse sequence to removal.
Translation: But you swear in different places.

Haynes: Prise away plastic locating pegs...
Translation: Snap off...

Haynes: Using a suitable drift...
Translation: The biggest nail in your tool box isn't a suitable drift!

Haynes: Everyday toolkit
Translation: Ensure you have an RAC Card & Mobile Phone

Haynes: Apply moderate heat...
Translation: Placing your mouth near it and huffing isn't moderate
heat.

Haynes: Index
Translation: List of all the things in the book bar the thing you want
to do!

For Added Haynes Fun:
Go to the first section, Safety First, and read the bit about
Hydrofluoric Acid - do you really want the advice of a book that uses
this form of understatement???!!?

Now look at the lovely colour section on body repairs - as you look at
these two pages say to yourself over and over until it sinks in "mine
will never look like that..."

Flick to the end and look at the colour glow plug pictures, how do
these compare to the glow plugs in your Mini? If you cannot locate the
glow plugs in your Mini see the last translation on the list!

NB: Haynes Manuals are (c)opyright of a very disturbed sadist :)


--
Chris Tomlinson









:lol:

[Chris LR]

Yep, all good memorys.

When ever I start work on a car I always find a hammer of some kind, a tyre lever and a knife.