View Full Version : cambelt failure c14nz
and now what??
the only problem is cambelt??
does my valves smashed by pistons?
engine C14NZ
sorry for my english.
meritlover
18-02-09, 10:51 AM
perhaps,
stick a new belt on and turn it over.
you may be lucky, at worst you will have damaged a few valves.
but it all depends on the conditions in which it broke. ie speed/revs
downshifting from 4th to 3rd gear aprox 4.000rpm.
meritlover
18-02-09, 11:29 AM
who knows
I thought all vauxhall 8v are valve safe?
meritlover
18-02-09, 11:55 AM
no
the spi can cause trouble even at low speed
but any cambelt failure could result in damage if the valve was at max lift at the point of failure
NOVA_LEE
18-02-09, 12:14 PM
my saxos just died with same problem but biggest problem is that its french
meritlover
18-02-09, 12:43 PM
my saxos just died with same problem but biggest problem is that its french
no the biggest problem is that your belt has broken. probably due to gross neglect or incorrect replacement.
GRUNT 16V
18-02-09, 12:49 PM
The Only One I Know Of That Dosnt Bend Valves Is The 1.3 And The Old 2 Litre
craig green
18-02-09, 01:21 PM
1.2 8v doesnt. Minimal cam lift.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.