View Full Version : temp gauge not working?
let_nova
12-02-09, 05:31 PM
its a L reg corsa 1.2. the temp gauge does not work. car gets up to temp ok and heaters work fine? any thoughts?:thumb:
Check the sensor wire, its on the end of the inlet manifold nearish the alt.
nova_saloon
12-02-09, 05:32 PM
ither the sensor has broken ive had two go on me or the wire has corroded to much but yeh there usually stuck on the left hand side of the inlet manifold, With blue wire attaching to it
Could be a badly corroded contact!
brainsnova
12-02-09, 07:52 PM
earth the wire at the sensor and the gauge will read full. then its the sensor at fault
let_nova
12-02-09, 08:14 PM
checked the contact etc seams fine will earth it and try that.
let_nova
12-02-09, 08:14 PM
earth the wire at the sensor and the gauge will read full. then its the sensor at fault
would of repped you but ive to spread it around!
jimbob-mcgrew
12-02-09, 10:50 PM
earth the wire at the sensor and the gauge will read full. then its the sensor at fault
wow...
if this is true :thumb: :thumb:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.