Lee
11-02-09, 10:54 PM
I need to shift my shell or im up shi*ter! Ive listed it twice on ebay, and its not shifted. I want £600 to see it gone, and imo thats a fecking steal! The cage is 400 before you even start buying and prepping the shell!
It is based on a 1992 1.2 Fun model in Miami Blue (Ive always said it was green!)
The shell itself is fully stitch welded front to back.
Welded in 6 point OMP cage (rear leg too short, as are most OMP cages coming out of their factory at the moment. They seem to have lost the drawings! I got around this by welding up a strong box section under the shorter leg (pictured)
Front turrets tagged to cage. NOT triangulated though, as I didnt want it too stiff, it was purely for front impact protection
Gage tagged to shell on A and B pillars
Rear strut brace welded in.
Spare wheel well removed and plated over
Nova gear linkage removed and replaced with Cav shifter. Along with the spare wheel well removal, this allows for a straight through exhaust, and gives room for an extra silencer if required
O/S chassis leg modified to take a big block 2.0
Doors lightened
Fiberglass sideskirts
Seat bars to take side mount buckets welded in
Half dash with switch panel included
Shell also comes with brake servo and MS, standard steering rack, CARB fuel tank, 14inch steels, old front struts and 2.0 hubs (although I would recommend the hubs arnt used, as the interference fit doesnt paticularly interfere lol)
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009291.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009292.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009293.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009294.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009295.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009296.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009297.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009298.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009299.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009300.jpg
It is based on a 1992 1.2 Fun model in Miami Blue (Ive always said it was green!)
The shell itself is fully stitch welded front to back.
Welded in 6 point OMP cage (rear leg too short, as are most OMP cages coming out of their factory at the moment. They seem to have lost the drawings! I got around this by welding up a strong box section under the shorter leg (pictured)
Front turrets tagged to cage. NOT triangulated though, as I didnt want it too stiff, it was purely for front impact protection
Gage tagged to shell on A and B pillars
Rear strut brace welded in.
Spare wheel well removed and plated over
Nova gear linkage removed and replaced with Cav shifter. Along with the spare wheel well removal, this allows for a straight through exhaust, and gives room for an extra silencer if required
O/S chassis leg modified to take a big block 2.0
Doors lightened
Fiberglass sideskirts
Seat bars to take side mount buckets welded in
Half dash with switch panel included
Shell also comes with brake servo and MS, standard steering rack, CARB fuel tank, 14inch steels, old front struts and 2.0 hubs (although I would recommend the hubs arnt used, as the interference fit doesnt paticularly interfere lol)
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009291.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009292.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009293.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009294.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009295.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009296.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009297.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009298.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009299.jpg
http://img.photobucket.com/albums/v287/Bottlethroddy/25012009300.jpg