Rally Car Wanted WHY?

[mk1rallycar]

Hi all, I've been thinking about replacing my Astra Rally car and would really like a Corsa or a Nova.

Anyone got a complete or part built rally, race or track car they're selling or thinking about selling?

Cheers

[ben lee]

would make a perfict rally car
also im not to far from you.

http://www.pngclub.com/forum/showthread.php?t=105875

[offplot]

What Are You After ?

[rallycraig]

I have a rolling nova prep'd shell, rolling on a r2 disc braked axle and group A front hubs, fully seam welded, all sealer removed, red exterior, white interior, multi point pilbeam type rollcage with forward triangulation, comes with bonnet, boot, doors and wings (mk2) quickrack and cav/corsa internal linkage, excellent condition having been garaged 12 years £ 1700

or

nova rally car, 95% ready for logbooking, just needs in-date seats,currently fitted with some corbeau forza's, was a j reg 1.0, now fitted with a sweet sounding 1.6 injection engine, f13 cr gearbox, ZF 40% diff, 4.3 cwp, poly bushed all round, competition engine mounts, bespoke hydraulic h-brake, belts dated 2011, mountney wheel, 16v front brakes, bilsteins all round, omp 6 point cage, fully seam welded, freshly painted white inside, outside and even underneath, full mot, strut brace, belt bar, welded seat rails, 2.25 plumbed in extinguisher plus a 1.75
hand-held, sump and tank guards,all pull cables fitted, 4 branch and rally exhaust system, custom fuel tank with built in pump, all lines inside, supplied with full interior should you want to take it road rallying. £2750

or

nova class 1/b9 rally car, pro seam welded throughout, braised door and window appertures, full plating kit fitted, multi point bolt in pilbeam cage, X diagonals, belt bar, front triangulation, welded seat rails, 10mm works sump guard, poly tank guard, corsa internal linkage, quickshift, upright hydralic h-brake, bias pedal box, r2 grooved disc braked back axle with mintex 1155 pads, poly bushed allround, 16v on front with grooved vented discs and mintexx 1166 pads, aeroquipp hoses, bilstein 2 1/4 coilovers on front with adjustable top mounts, 10'' 210lb springs, rears are bilstein dampers with a choice of tarmac or gravel springs, rose jointed track rod ends, kwik rack, corsa B varible rate electric power steering column, the list on this car goes on and on, quaife box, 135 bhp 1300 engine, had it 9 years, £5250 full spec list can be emailed.

[dellortotwin40s]

hi I have got a part built 1 with willwood bias peddle box willwood hydralic handbrake disc axle with new pads and discs 2 litre brakes vented discs and new pads straight through exshaust with good sounding homemade back box brand new omp bucket seats omp harnesses alloy tank coil overs full roll cage and door bars (bolt in) 1.2 ENGINE with dellorto 40s complete setup mrk1 shell engine bay seam welded alloy foot wells 3 spoke gsi alloys looking for £1100

[dellortotwin40s]

and spare drum axle too

[Jack]

Where abouts in Somerset are you?

Lee has a well built rolling shell which he's trying to sell, located in the Bristol area. See here (http://www.pngclub.com/forum/showthread.php?t=114108). Taking offers round £600.

[mk1rallycar]

I have found a few nice cars which I am trying to find time to go and look at but they have been quite far away so not had chance yet.

So at the moment still looking if anyone else is selling up?