how do i wire this up to the dash

[exmouth_nova]

iv got a mk1 nova gte with a mk2 gsi dash in it with the buton near the lights to make the lamps go um and down
now then iv got the buton and the wires behind it but havent got the wirering to the lights up front
i aldready have the moters for the lights just want to know how i wire it for the dash to the head lamps please help lol:confused: :cry:
http://i138.photobucket.com/albums/q264/corsa_gt/HPIM0201.jpg

[Ernie]

of the top of my head im sure its only about 3 wires.
i think only 1 wire has to be run from the dash to the motors as the switch gets power from inside the car and the motors get theres from the lights.
The 1 wire that goes through makes them go up and down.

[exmouth_nova]

so how do i wire it up lol
do i take the pos from the lights a pass it to the dash or is it the negative
thanks for your help ernie

[AlexW]

Just checking, have you done the Mk1- Mk2 front end conversion?

[Jack]

4 wires on switch:

[4] - GRGN - Illumination track
[6] - GE - to RH headlamp/dipswitch relay (GE wire)
[7] - BRGE - to "G" connector on motors
[3] - BR - Earth

Motors have:

[G] - BRGE - to 7 on switch
[+] - GE - to GE from RH headlamps
[-] - BR - Earth


.... thats from Haynes wiring diagram.

[Sloth]

get a haynes and use that. simples!